Please select Into the mobile phone version | Continue to access the computer ver.
RC Firmware update: tethered?
720 2 2018-11-24
Uploading and Loding Picture ...(0/1)
o(^-^)o
DJ_Fan
Second Officer
Flight distance : 617405 ft
United States
Offline

Can the firmware of the Remote Controller (RC) be done in a tethered manner?

I'm getting an ERROR getting one of my RCs synced up with the latest firmware (FW). I have updated my Mavic2Pro (M2P) using the tethered way via DJI Assistant2 for Mavic. So, it has the current FW (V01.00.0200;  DATE: 2018-11-22).

However, when I connected the M2P with another RC, it automatically downloaded an upgrade for the RC and Aircraft. And prompted me to Upgrade. So, I did. It failed and asked me to retry (which I did). And, the FW Upgrade for the RC never did happen. When I ran GoApp4, there is a Warning in Red saying the RC FW is not up to date.

This is why I'm asking if RC FW can be updated using the tethered way.

2018-11-24
Use props
DJ_Fan
Second Officer
Flight distance : 617405 ft
United States
Offline

OK, I found out why this is happening. You need to upgrade the GoApp4 to the latest version before it can drive the upgrade for the FW of the aircraft and RC.
2018-11-24
Use props
DJ_Fan
Second Officer
Flight distance : 617405 ft
United States
Offline

Another interesting factoid:  If you're a Crystal Sky (CS) owner, then you will probably not be able to upgrade the FW through CS because the latest CS GoApp is one version lower than the iPhone.
I had to resort to upgrading the M2P through DJI Assistant2.
2018-11-24
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules