Please select Into the mobile phone version | Continue to access the computer ver.
Naza M V2 won't work with PPM
4050 2 2014-11-7
Uploading and Loding Picture ...(0/1)
o(^-^)o
stp
lvl.1
Flight distance : 589718 ft
Denmark
Offline

Hi

I am now trying my second PPM receiver and the Naza-M V2 doesn't like it on the 1.st channel = aileron. It only moves half 50%. It doesn't move full.
The three other channels works perfect. Since I have now tried with two brand of recievers and since they work perfect on my Naze32 I guess the problem is with the Naza-M V2?
I did a calibration on the Naza-M V2 but it doesn't help. Only half deflection

Anyone have an idea?

BR
Steen

2014-11-7
Use props
stp
lvl.1
Flight distance : 589718 ft
Denmark
Offline

I found the problem.

When binding - you need to have all channels in the center. This is just too stupid. I haven't seen anything about this and the transmitter is complaining about the "throttle high".

DJI should add this to their documentation.

BR
Steen
2014-11-7
Use props
DJI-Tenna
lvl.1

United States
Offline

stp@pilots.dk Posted at 2014-11-8 00:30
I found the problem.

When binding - you need to have all channels in the center. This is just too  ...

You are quite right, thanks for your concern and great suggestion
2014-11-10
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules