Trying to do some repairs to a friends phantom 4.
Vision system requires calibration but cant connect to dji assistant 2.
My p4p and mavic connect fine.
Any ideas would be appreciated

Aloha Hellsgate,

     At the PhantomHelp.com web site, if you look in the Software Archives, you can download some of the older DJI Assistant 2 software.  The current version is 2.0.6, but you might try 2.0.4 to see if it recognizes the P4.  If not try the 2.0.2 version.  If none of those work, the problem is not with DJI Assistant 2.  

     Other than that, I can only think about a firmware problem but then, the P4 has an interesting history with firmware.  BTW, are you using the same cable as with the P4P and Mavic?

     Hope this helps!

Aloha and Drone On!

Cetacean Posted at 12-10 03:17
Aloha Hellsgate,

     At the PhantomHelp.com web site, if you look in the Software Archives, you can download some of the older DJI Assistant 2 software.  The current version is 2.0.6, but you might try 2.0.4 to see if it recognizes the P4.  If not try the 2.0.2 version.  If none of those work, the problem is not with DJI Assistant 2.  

Yes i am using the same cable so thats not the issue but i will try different versions of assistant to see if they work.
Thanks for the reply

Thanks i like very good

Yes i am using the same cable so thats not the issue but i will try different versions of assistant to see if they work.
https://cleanmaster.me/        https://www.oovoo.com/adam4adam/        https://mathway.vip/