Hi guys, just received my Osmo Pocket and noticed that in the Timelapse mode the minimum interval seconds is 3s, any reason why 1s is not in?

On the Pocket and Mimo I can set it to 2s on both Timelapse and Motionlapse. Have you updated the firmware?

Rogue0ne Posted at 12-13 01:10
On the Pocket and Mimo I can set it to 2s on both Timelapse and Motionlapse. Have you updated the firmware?

That’s weird I only have 3s on both pocket and mimo, am running on the latest firmware. Any mods for clarification?

Hi Ezaq, thank you for bringing this query to us. Apologies for the troubles. I'd like to ask, what is the brand or make of your mobile device wherein you downloaded your DJI Mimo App? I will be providing the list of compatible devices below for your reference.



However, if your device is on the list, have you tried to uninstall and reinstall the app? Kindly let us know if the issue persists after reinstalling the app. Thank you.

DJI Gamora Posted at 12-13 02:59
Hi Ezaq, thank you for bringing this query to us. Apologies for the troubles. I'd like to ask, what is the brand or make of your mobile device wherein you downloaded your DJI Mimo App? I will be providing the list of compatible devices below for your reference.

[view_image]

Hi thanks for the reply, I’m using a iPhone XR, tried reinstalling the app but still shows only 3s as the minimum interval in timelapse mode.

Rogue0ne Posted at 12-13 01:10
On the Pocket and Mimo I can set it to 2s on both Timelapse and Motionlapse. Have you updated the firmware?

Motionlapse? Can only find Timelapse...

Rogue0ne Posted at 12-13 01:10
On the Pocket and Mimo I can set it to 2s on both Timelapse and Motionlapse. Have you updated the firmware?

Motionlapse? Can only find Timelapse...

CineView Media Posted at 12-13 03:36
Motionlapse? Can only find Timelapse...

Swipe right in the menu where you can choose Timelapse. There you can choose between Motionlapse and Timelapse.

Ezaq Posted at 12-13 02:11
That’s weird I only have 3s on both pocket and mimo, am running on the latest firmware. Any mods for clarification?

Hi Ezaq

For time-lapse format, this is video and video+jpeg, which can be set in DJIMimo and swipdown

The current firmware minimal interval is 2s for video and 3s for video+jpeg

DJI-ytao Posted at 12-13 03:47
Hi Ezaq

For time-lapse format, this is video and video+jpeg, which can be set in DJIMimo and swipdown
[Image]

When I switched to timelapse mode and set the intervals + duration, both the app and Pocket only showed me 3s and no 2s in sight.

Ezaq Posted at 12-13 03:57
When I switched to timelapse mode and set the intervals + duration, both the app and Pocket only showed me 3s and no 2s in sight.

Edit, got it had to change the settings for 2s to show, thanks so much!

Ezaq Posted at 12-13 04:00
Edit, got it had to change the settings for 2s to show, thanks so much!

Hi Ezaq, good thing everything's working with your DJI Osmo. For more tips and tricks kindly visit this link for more added information about your new Osmo. Thank you for your support.

Is there a chance that we can get a shorter interval down the road? .5 seconds would be fantastic! Even a 1 second interval would make worlds of difference. I was attempting to do a timelapse of myself driving with the Osmo Pocket mounted in-car and 2 seconds is just too long for that fast of movement.

Cheers

DJI Gamora, And what prevented the developers to add Oneplus 6, you do not know...is he bad?) There is 5T, there is 6T, and mine is not. Therefore, only a 3-second interval is available in timelaps. Indeed, it is necessary to add 1 second, because the frame skipping is enormous.

1 sec would be great. Hopefully it might added some time.

1 sec would be great. Hopefully it might be added some time.

When I am in time lapse mode filming traffic as I drive, when I go around a curve my gimbals turns as well and stays there. Am I supposed to be on slow or fast motion, and tilt locked? I just want it to looking straight ahead even when turning. I hope this makes sense

1 sec will be great, 0.5 sec will be the best.

Mine is only showing 3 seconds as the smallest interval also. I hope they add smaller incriments like 1s, 0.5s, and 0.25s. It would be nice when shooting shorter events to be able to choose smaller intervals.

Add me to the 1 second club as well. And I would rather have the 4K single frames than the 1080p video if one has to go...

Yes, please add the option to go down to at least 1 sec interval. The timelapse/motionlapse feature was one of the main reasons I got the OP.

Yes 1 sec would be great! I‘m hopeful for this!

+1 shorter intervals needed. 0.25, 0.5 and 1 sec please.

Me too .... shorter intervals needed. 0.25, 0.5 and 1 sec please.

Hondaboi2000@gmail.com Posted at 2018-12-28 17:20
When I am in time lapse mode filming traffic as I drive, when I go around a curve my gimbals turns as well and stays there. Am I supposed to be on slow or fast motion, and tilt locked? I just want it to looking straight ahead even when turning. I hope this makes sense

Same problem that I had when I tried to shoot a timelapse while driving as well. The OP was mounted i flashlight mode and the gimbal was tilt locked. Not sure if that had anything to do with it though, or if it will work better if set up differently.

CasualDronePilot Posted at 1-19 11:34
Same problem that I had when I tried to shoot a timelapse while driving as well. The OP was mounted i flashlight mode and the gimbal was tilt locked. Not sure if that had anything to do with it though, or if it will work better if set up differently.

You should use FPV mode in this case I think

Hondaboi2000@gmail.com Posted at 2018-12-28 17:20
When I am in time lapse mode filming traffic as I drive, when I go around a curve my gimbals turns as well and stays there. Am I supposed to be on slow or fast motion, and tilt locked? I just want it to looking straight ahead even when turning. I hope this makes sense

Try FPV mode. It should work better for mounting like that

kburn Posted at 1-19 13:18
You should use FPV mode in this case I think

Thanks for the tip. I'll try that next time.

Hondaboi2000@gmail.com Posted at 2018-12-28 17:20
When I am in time lapse mode filming traffic as I drive, when I go around a curve my gimbals turns as well and stays there. Am I supposed to be on slow or fast motion, and tilt locked? I just want it to looking straight ahead even when turning. I hope this makes sense

Try FPV ( First Person View ) mode....  you should get the result you are looking for

Ezaq Posted at 2018-12-13 04:00
Edit, got it had to change the settings for 2s to show, thanks so much!

Change what settings?  Lowest I can select is 3 seconds.

BigStuart Posted at 1-26 08:36
Change what settings?  Lowest I can select is 3 seconds.

It's a bit confusing...

Go to time lapse mode then press right button
on bottom of screen... you see 3S... click it... if 2S is NOT there... continue below
swipe down on screen... then swipe right
change the setting by clicking the screen to show only one icon of film strip and not two
then go back to main screen... select 3S and 2S will be there.

Sorry I don't know the names of every icon... but this is how you change it

Spazz Posted at 1-26 09:29
It's a bit confusing...

Go to time lapse mode then press right button

Wow that was convoluted!  Thanks, I would never have found that otherwise!

Please bear in mind "video only" setting that allows 2 second interval is 1080p only; whereas the saved individual frames in combo mode (which forces the minimum interval to 3 seconds) are 4K...

Bing Err Posted at 1-4 17:27
Mine is only showing 3 seconds as the smallest interval also. I hope they add smaller incriments like 1s, 0.5s, and 0.25s. It would be nice when shooting shorter events to be able to choose smaller intervals.

Turn off keep original files and you will see 2 seconds

Bing Err Posted at 1-4 17:27
Mine is only showing 3 seconds as the smallest interval also. I hope they add smaller incriments like 1s, 0.5s, and 0.25s. It would be nice when shooting shorter events to be able to choose smaller intervals.

Bing.... see my reply #31 above for instruction on how to change settings to get 2S in time lapse

Spazz Posted at 1-27 08:35
Bing.... see my reply #31 above for instruction on how to change settings to get 2S in time lapse

Thanks Spazz. I played with the Osmo Pocket a lot on my short vacation to Phoenix and figured out a lot of settings. I'm pretty sure that I had a couple of timelapse points added and that's why the "infinity" mode wasn't showing up. Makes sense when I thought about it. How could it move between points if it was set to run for an undetermined amount of time?  Thanks for the feedback though.

1s would be great!

Spazz Posted at 1-26 09:29
It's a bit confusing...

Go to time lapse mode then press right button

Thanks @Spazz for the instruction. However when I pressed right button (function button), OP changed to photo mode. Clicked on 3s (blue color) brought me to timelapse setting.

This should be done on Op or Mimo app?

Kamal Nor Posted at 1-28 22:18
Thanks @Spazz for the instruction. However when I pressed right button (function button), OP changed to photo mode. Clicked on 3s (blue color) brought me to timelapse setting.

This should be done on Op or Mimo app?

Sorry I found already but I'm not gonna use it as it won't keep the jpg for me to create 4k timelapse. Will stick to my Hero 6  for timelapse.
Thanks anyway.

Yes please add 1s and 0,5s intervals! So necessary - and with that a complete gimbal lock. Ultimate Hyperlapse machine!