Hi,
Just tryed the Olympus 25mm 1.8 witch would be colpattible with the x5s.
But gimball and camera are fliping out.

After start in up the Gimbal pitsh is not working.
I get decoding errors mesage in app.
And gray or white screen...... some later I get image but focus is not working as all other camera settings.
Tryed to renew firmware and factory default, bus not helping.
My panasonic 14-45 works fine.
I run all latest firmware end use cristalscy

Someone knows what to do?

Can you try the lens on a camera and see if it works? Also try cleaning the contacts, and making sure you have proper balancing ring attached (though lacking a balancing ring would not have resulted no/bad video feed).

rent Posted at 12-24 10:19
Can you try the lens on a camera and see if it works? Also try cleaning the contacts, and making sure you have proper balancing ring attached (though lacking a balancing ring would not have resulted no/bad video feed).

Hi, No I have no other camera to test it on. Cleaned the contacts and use a balansering.
If this: Olympus M.ZUIKO DIGITAL - 25mm 1:1.8 lens normally has to work on the x5s I will order a 2th one to try.
Thanks

I read here or on another forum about someone having trouble with his until they updated the lens. It has to be done via an Olympus camera body though.
Just got to be the lens. ? It works great on X5/X5s, so should on yours.

I’d trade for another lens and ask that it is late version.

Caspers driver Posted at 12-24 16:27
I read here or on another forum about someone having trouble with his until they updated the lens. It has to be done via an Olympus camera body though.
Just got to be the lens. ? It works great on X5/X5s, so should on yours.

Thanks I'll try that.

Reno Maenhout Posted at 12-24 22:09
Thanks I'll try that.

You’re welcome. Sure hope that does it.