Please select Into the mobile phone version | Continue to access the computer ver.
Problem with my RTH
293 3 2018-12-27
Uploading and Loding Picture ...(0/1)
o(^-^)o
Billy Banana 4
lvl.3
United States
Offline



Hi,
I have been having a problem with my return to home feature. The last few times I tried the RTH it seems confused. It turns in the direction of the home point ascends to the proper altitude and starts heading home but then abruptly stops (like something is in its' way) increases altitude, starts returning, stops abruptly, increases altitude starts to head home, stops abruptly etc. etc. It has done this the last 3 times I have tried the feature and all flights were in different areas. In the flight log it says "braking to avoid obstacle". I was not flying into the sun, there was no obstrucyion and the sensors were clean. It even acted this way with OA off.
Has anyone else experienced this and if so how did you fix it?

Any help would be appreciated, thanks for reading!
2018-12-27
Use props
GroTToFlyeR
First Officer
Flight distance : 1064790 ft
United States
Offline

Have you tried to disable your sensors and try
1-5 20:04
Use props
Boffin
First Officer
Australia
Offline

Are you flying on the edge of a NFZ?  This can cause such behaviour when you reach the boundary
1-5 20:13
Use props
Billy Banana 4
lvl.3
United States
Offline

thanks guys
Yes disabling my sensors is the ONLY way it works but I sure don't want to have to do that in an emergency.
I am not near a NFZ either
1-6 09:33
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules