Cadams2222
lvl.1
United States
Offline
|
Eamalfi Posted at 1-26 13:02
Hello, I has the same problem whit matrice 600 pro.
I can updated the drone and the air system, but when I try to updated the remote control, It is not a firmware version to the remote control.
I try with the CristalSky and with a cellphone and the result was the same.
I did finally get both firmware updates to work. What I had to do was downgrade both firmware versions on the drone and the remote. Then I updated the remote control first, then the drone and everything worked fine after that. Be sure not to interrupt the installation of the remote control firmware. It takes around 15 min. or so so just be patient. At times it will look like it's doing nothing.
Hope this helps! Good Luck! |
|