Please select Into the mobile phone version | Continue to access the computer ver.
new nozzles
976 5 2019-1-14
Uploading and Loding Picture ...(0/1)
o(^-^)o
Ralf056
lvl.4

Switzerland
Offline

Hello Sprayer
I want to add additional profiles for spray nozzles to the MG-App of the MG-1S. How should I proceed?
2019-1-14
Use props
ShatuisEQ
lvl.1
Ecuador
Offline

hello Ralf
2019-1-15
Use props
ShatuisEQ
lvl.1
Ecuador
Offline


so I understand you want to add additional nozzles to the spray system?

or

Do you want to use keels other than those recommended by the manufacturer?
2019-1-15
Use props
Ralf056
lvl.4

Switzerland
Offline

ShatuisEQ Posted at 1-15 07:46
so I understand you want to add additional nozzles to the spray system?

or

I want to switch from 110 ° to 80 ° nozzles and
insert additional nozzles.
2019-1-15
Use props
ShatuisEQ
lvl.1
Ecuador
Offline

If you can change the nozzles from 110 ° to 80 ° without problem, but you are going to change the width of the belt and the flow changes

In addition to this, each pump works to a maximum of 4bar or 60Psia, so I think that if you can add additional nozzles but you would have to perform a calculation to divide the pressure into more nozzles.

which means less pressure in the spray
2019-1-28
Use props
Ralf056
lvl.4

Switzerland
Offline

I do not want to add more nozzles but only change 80 °. For this I have to enter the 80 ° nozzles in the MG app. How does it work?
2019-1-28
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules