Please select Into the mobile phone version | Continue to access the computer ver.
Is my gimbal cable going to break soon?
273 4 1-27 16:13
Uploading and Loding Picture ...(0/1)
o(^-^)o
Alex B.
Captain
Flight distance : 4622680 ft

Spain
Offline

Hi all
Today I was flying my Mavic Pro, well after landing I noticed the cable on the gimbal is naked, I think I remember it being different.
Also it gives the impression that it’s going to break soon.
Is it normal?
There is a bit of rubber band on one end of the cable, which makes me suspect that it should be different.

Fly safely
Alex
1-27 16:13
Use props
Alex B.
Captain
Flight distance : 4622680 ft

Spain
Offline

1-27 16:13
Use props
DJI Tony
Super Moderator

Offline

Hi, thanks for the inquiry. If there will be a physical problem with the drone, we would recommend sending the unit to our facility for us to be able to fix it and avoid further damage to the drone. You may contact our support using the link below. Thank you for your support.

www.dji.com/support
1-27 16:42
Use props
Suren
Captain
Flight distance : 6839144 ft
South Africa
Offline

there is a cover that goes over that cable, I am sure you can get that on ebay
1-27 19:35
Use props
Alex B.
Captain
Flight distance : 4622680 ft

Spain
Offline

Suren Posted at 1-27 19:35
there is a cover that goes over that cable, I am sure you can get that on ebay

Thanks, but I couldn’t find one
Also after reading another thread on this subject, it appears that is normal by design.
Not too good design here in my opinion.
Exposed wires can get damaged over time when exposed to weather conditions

Fly safely
Alex
1-28 02:31
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules