Please select Into the mobile phone version | Continue to access the computer ver.
Continual Controller Calibration Problem (Inspire 2)
997 2 2019-1-28
Uploading and Loding Picture ...(0/1)
o(^-^)o
djiuser_4COyjxsnNATd
lvl.1
United States
Offline

Last couple weeks, every time I fire up RC, it beeps continually, indicating it needs calibration.  go thru teh process but the 'Finish' button never highlights...which means the process never completes 100%.  

All firmware is up-to-date on both RC's, i2 and all batteries. Getting monotonous and frustrating. Also, if clients are nearby, they usually asking 'VERY quickly' what's wrong...  

Anyone seen this issue?  THANKS!!!
2019-1-28
Use props
DJI Tony
Administrator

Offline

Hi, we do apologize for the troubles that it may cause. If the troubleshooting steps were exhausted, however, the problem would persist, I'm afraid that the remote controller wouldn't work properly and may cause incident during your flight. We would recommend contacting our support for further check. You may refer to the link below.

www.dji.com/support
2019-1-28
Use props
Edward J Smith
Second Officer
Flight distance : 1852408 ft
  • >>>
United States
Offline

Did you ever get a answer to this?
2019-7-28
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules