Please select Into the mobile phone version | Continue to access the computer ver.
Gimbal Dual Operator, Gimbal automatically goes back to center
311 1 2-5 05:37
Uploading and Loding Picture ...(0/1)
o(^-^)o
GoMe
lvl.1
Germany
Offline

Hi,

I hope anyone can help me here. We have an Inspire 2 with a X5 Camera. We work on dual operator mode most of the time.
This worked perfect for the past flights.

Problem. Since the last flight I can't control the gimbal properly with the Slave Remote. When I rotate the Camera in yaw or pitch axis it goes back to center after 1 Second.

I first start the Drone with the Master Remote only. When I move the pitch axis of the gimbal on the Master Remote it stays in place. The Gimbal is in free mode. Then I start the Slave remote and take control over the gimbal. As soon as I rotate the camera in any direction it jumps back in center position after 1 Second.

Any tipps? I don't know what I might have changed. And it worked fine the first months.
I hope and think that there is just one little button I'm too blind to find right now.

Kind regards
GoMe





2-5 05:37
Use props
GoMe
lvl.1
Germany
Offline

Firmware Inspire: 01.02.0300
Firmware Gimbal: 01.09.22.22
Firmware Remote: 01.01.0050
2-5 05:45
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules