N3-AG has been used for my multicopter for one year.
Assistant 2 suddenly can not connect to N3-AG FC.
Assistant 2 autopilot was installed and reinstalled several times.
Changed USB port tens of several times, and also USB cables.

Windows 10 pc is used. The USB driver seems to work correctly according to the Device Manager: No yellow exclamation amrk at all.
It is linked as USB com5 port.


PLS inform me a solution.

This could be win10 using driver en-forcement on un-signed drivers, Check driver properties to verify it is the Dji driver not a generic windows one.

If it is a generic then, hold shift key and restart windows to troubleshoot menu.
Select advanced options then opt to disable enforcer mode for signatures
Reboot and confirm choice.
Re install dji driver.

Hope this helps

Thank you for your help!
I already made a success to get the assistant program connected to N3-AG.

Song Posted at 2-12 02:59
Thank you for your help!
I already made a success to get the assistant program connected to N3-AG.

Your's led module blink before you connect to pc?