Phantom 4 Pro+ problems.
833 0 2019-2-24
Uploading and Loding Picture ...(0/1)
o(^-^)o
Twigwater.com
lvl.2
Flight distance : 5994 ft
Australia
Offline

Hi Everyone.

I've been experiencing some glitches with my Phantom 4 Pro+ since a firmware upgrade after the green screen problem a little over a yaear ago.
All the issues where small at first, a warning about max alititude reached when the drone first took off and a constant message to upgrade the flying database,  leading up to a temporary fly away the other day and two total dropouts today. Also, FWIW, the drone lost signal at apr. 500 meteres away the other day and went into fly home mode, but stopped well short of the landing point and started to land itself in the bush.

In sort, I've had increasingly common glitches.

Today, after my flight, I put the drone away and retuned home and the controller started up ok and then logged me out and now won't reconnect to the network.
(the network is fine)
The drone apears to power up normal, but I can't get a connection to it either.
FWIW, it's probably done less than 50 flights.
Also, (generally) if I've had a glitch or two at startup, until yesterday, everything was then fine for a flight.

Any ideas to reset things or start over ?

I'm quite concerned.

Cheers,
David.
2019-2-24
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules