Please select Into the mobile phone version | Continue to access the computer ver.
New Zenmuse XT2 Firmware Released(2019/02/27)
1364 8 2-26 19:02
Uploading and Loding Picture ...(0/1)
o(^-^)o
DJI Support
DJI team
Flight distance : 2408 ft

China
Offline

Overview
  • Date:        2019.02.27
  • Firmware:        v01.00.00.20
  • Camera 1 Firmware:        v01.00.00.34
  • Camera 2 Firmware:        v06.02.20.00
  • Gimbal Firmware:        v00.02.06.04
  • DJI Pilot App Android:        v1.2

What’s New?
  • Compatible with Matrice 200 Series V2 aircrafts.

Notes:
  • This update is for the Zenmuse XT2 gimbal and camera only. It cannot be used to update the aircraft or the Intelligent Flight Battery.
  • The Zenmuse XT2 must be connected to the aircraft before starting this update.
  • Ensure that there are no other updates on the microSD card and that the battery level is above 50%.
  • It takes approximately five minutes to update the firmware. The aircraft beeps when the update is complete.


2-26 19:02
Use props
RC POWER
lvl.1

Brazil
Offline

Hi all. So I did the update bug using a Matrice 600 pro. Everythink worked normally, I means sussesuccessful!! But now the thernal camera disappear. I can see the “normal “ camera only. How Can I downgrade de firmware....how I can fix it???
3-9 16:26
Use props
UAS Stockholm
lvl.1

Sweden
Offline

I did it too but now i have no picture at all. I´m able to move the camera so the gimball is working but there is no picture and all the menues are gone. It is like the software does not know that the camera is mounted. I also need helt downgradig it or to perform a hard reset! I use the Matrice M210.
3-13 00:34
Use props
djiuser_UWhdKX7UF90p
lvl.2

United States
Offline

DJI needs to fix this issue. The Pilot app in the IOS environment is terrible and does not work. The new firmware update for the XT2 is also leaving many customers disappointed.
3-20 11:56
Use props
AQUIF
lvl.3
India
Offline

I 'm planning to by M600 Pro with xt2 for almost 6-7 months now.....but these issues are holding me up ......hope DJI resolves these issues ASAP...
many people depend on your systems......


3-26 07:25
Use props
dronethermal
lvl.1
Flight distance : 1149794 ft
  • >>>
United States
Offline

Very similar problem here.  Updated the firmware on my XT2 and now its bricked.
I then reset everything...and then updated the controller, crystalsky and the matrice 201 v2 and still no signs of the XT2 connected.

My supplier says this is happening a lot.  I had to send my back in and they will send me a replacement.

This literally happened out of the box.
4-25 09:03
Use props
Cody1234
lvl.2
  • >>>
United States
Offline

Did anyone find a solution to this problem? I am having the exact same issue, it's unfortunate that we invest so much and get punished for a simple firmware update.
5-2 09:20
Use props
DJI Susan
Administrator

Offline

Cody1234 Posted at 5-2 09:20
Did anyone find a solution to this problem? I am having the exact same issue, it's unfortunate that we invest so much and get punished for a simple firmware update.

Hi Cody1234, I'm sorry for the late response. For the camera issue, we sincerely suggest you start a case and send it in for diagnosis: https://www.dji.com/support The designated team will take care once they received the package, thank you!
5-8 22:38
Use props
fans3c8e51ca
lvl.1
Flight distance : 472550 ft
Brazil
Offline

I also had this problem, when I updated the firmware of the XT2, now the M210 does not recognize it.  I'm losing money and credibility to my clients, is there a way to downgrade?
5-15 04:58
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules