Please select Into the mobile phone version | Continue to access the computer ver.
Question about unlimited timelapse while the unit is plugged in.
435 14 3-11 15:56
Uploading and Loding Picture ...(0/1)
o(^-^)o
Bing Err
Captain
Flight distance : 7258963 ft
  • >>>
United States
Offline

Question for those of you using the wireless base while trying to record an infinite (unlimited) time-lapse while plugging in your Osmo Pocket to wall power.

I've attempted several unlimited timelapse but the Pocket eventually shuts off (somewhere between 5-10 hours). Tonight it was using multiple power sources but the battery still slowly depleted even when it was plugged into wall power. I took off the wireless base and tried it again and it appeared to hold it's charge. Can someone else try this and get back to me.

Conclusion: When using the wireless base and plugged into power the battery on the unit STILL slowly depletes until it turns off.

BUT: If I bypass the wireless base and plug the power directly to the Osmo Pocket it stays on.

Can anyone confirm of prove this wrong?

Screenshot_20190311-162919.png
3-11 15:56
Use props
Curt1591
First Officer
Thailand
Offline

Sounds like you're on to something.

My question is, if you want to do more than "5-10 hours", why not just plug power directly into the pocket - no wireless?
3-11 17:02
Use props
Bing Err
Captain
Flight distance : 7258963 ft
  • >>>
United States
Offline

Curt1591 Posted at 3-11 17:02
Sounds like you're on to something.

My question is, if you want to do more than "5-10 hours", why not just plug power directly into the pocket - no wireless?

I like to set it up on wireless because I can't ALWAYS get behind or next to the Pocket to set up the shot. Like if it's in a weird area that I can't see the settings or the screen. I can still set it up on wireless but just unplug the wireless after I start the timelapse. But I have to be really careful that I don't bump it too much to change my shot after I've got it all dialed in.
3-11 17:32
Use props
Curt1591
First Officer
Thailand
Offline

Bing Err Posted at 3-11 17:32
I like to set it up on wireless because I can't ALWAYS get behind or next to the Pocket to set up the shot. Like if it's in a weird area that I can't see the settings or the screen. I can still set it up on wireless but just unplug the wireless after I start the timelapse. But I have to be really careful that I don't bump it too much to change my shot after I've got it all dialed in.

Maybe use the USB-C port for charging and use an extension cable hook your phone to the smartphone adaptor.
3-11 17:50
Use props
Curt1591
First Officer
Thailand
Offline

If you have a power bank or power supply that uses USB-C, you could try this set up: Wireless Extension
3-11 17:56
Use props
Bing Err
Captain
Flight distance : 7258963 ft
  • >>>
United States
Offline


I saw that earlier, thought it was clever. And would make it easier to disconnect the wireless, but I could still bump the tripod while hooking up the USB C power. I could try a USB C adapter/splitter.
3-11 18:15
Use props
edwardyyy
Second Officer
Hong Kong
Offline

the camera will not start charging automatically again after it was charged 100% (protection mode turn on?).
I hope the protection mode will be cancelled when the battery level is dropped below 25% and the charging mode will be waked up automatically.
3-11 19:00
Use props
Bing Err
Captain
Flight distance : 7258963 ft
  • >>>
United States
Offline

edwardyyy Posted at 3-11 19:00
the camera will not start charging automatically again after it was charged 100% (protection mode turn on?).
I hope the protection mode will be cancelled when the battery level is dropped below 25% and the charging mode will be waked up automatically.

Not that I've experienced. I'll have to setup a GoPro time-lapse pointed at the Osmo Pocket doing it's own time-lapse, to see when it's shutting off. Right now I have one running at home but I'm NOT using the wireless base.
3-11 21:21
Use props
Blellow
First Officer
Flight distance : 72848 ft
United States
Offline

Edwardyyy, that must be it!  Genuis!  Thank you.
3-12 09:53
Use props
The Rev
Second Officer
Flight distance : 1051680 ft
United Kingdom
Offline

Mine discharged to 73% then stopped discharging for unknown reasons
3-12 12:06
Use props
Bing Err
Captain
Flight distance : 7258963 ft
  • >>>
United States
Offline

I just ran a 24 hour time-lapse while power plugged directly into the Osmo Pocket and it ran perfectly and when I stopped it battery was 100%. So not sure why it DOESN'T charge when plugged into the wireless adapter. I'll be testing more from different power sources.
3-12 12:12
Use props
LouisP
First Officer
Flight distance : 41952 ft
United States
Offline

edwardyyy Posted at 3-11 19:00
the camera will not start charging automatically again after it was charged 100% (protection mode turn on?).
I hope the protection mode will be cancelled when the battery level is dropped below 25% and the charging mode will be waked up automatically.

So if what edwardyyy says is true.. if you charge with a high current charger, the osmo will get to 100 percent, stop charging and then run the battery down and shut off.   But if you find a charger that is "just right" it will maintain the battery in the osmo at a level just below 100 percent forever.
3-12 13:11
Use props
edwardyyy
Second Officer
Hong Kong
Offline

I am not an EE, I don't known the mechanism of the charging process.
To protect the battery from over charged, I think there must be some kind of communication between the CAMERA + WiFi MODULE + POWER BANK.
The problem here is one of them "SLEEP" after the charging is completed.
So, my own solution to wake them up is pressing the button on my power bank every 45min~1hr. I hate this.
I hope someone here can find out a better ans.
3-12 19:34
Use props
Bing Err
Captain
Flight distance : 7258963 ft
  • >>>
United States
Offline

edwardyyy Posted at 3-12 19:34
I am not an EE, I don't known the mechanism of the charging process.
To protect the battery from over charged, I think there must be some kind of communication between the CAMERA + WiFi MODULE + POWER BANK.
The problem here is one of them "SLEEP" after the charging is completed.

So far my solution is to NOT use the wireless adapter on longer time-lapses. Connecting directly to the bottom of the Osmo Pocket kept it on for 24 hours. I will keep testing different scenarios to see what works and what doesn't.
3-12 22:45
Use props
Blellow
First Officer
Flight distance : 72848 ft
United States
Offline

I will try it tonight.  Shooting storm crystals.  This should be good.
3-13 14:04
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules