Please select Into the mobile phone version | Continue to access the computer ver.
Phantom 4 RTK - oblique POI for 3D Point Cloud and Mesh
1573 2 2019-3-12
Uploading and Loding Picture ...(0/1)
o(^-^)o
RotorTalk
lvl.1
Flight distance : 628392 ft
  • >>>
United Kingdom
Offline

Hello,
In order to produce 3D meshes and point clouds of isolated structures such as single buildings, towers or castles one has to shoot these via a set of overlapping images ideally shot from a set circumference/radius.  PH4 does this via POI but the PH4 RTK has no programme/flight mode to do this - only rectangular grid oblique.  Please can DJI research this and provide a solution that allows the pilot to define flight radius and shots triggered according to either overlap % or degrees in 360 degree pan/POI.  It would also be nice to see the PH4 RTK equipped with all the flight modes of the normal PH4 Pro!! Thanks... James, UK
2019-3-12
Use props
patiam
Captain
Flight distance : 1093865 ft
  • >>>
United States
Offline

Why DJI comes out with new software for supposedly higher grade systems that is less capable than that of the existing lower level systems is beyond me.
2019-3-12
Use props
RotorTalk
lvl.1
Flight distance : 628392 ft
  • >>>
United Kingdom
Offline

patiam Posted at 3-12 14:02
Why DJI comes out with new software for supposedly higher grade systems that is less capable than that of the existing lower level systems is beyond me.

It get's better.  They provide a GNSS RTK mobile ground station that could theoretically use the PH4 RTK as a base station to collect RTK ground control points (which they say are highly recommended as part of the workflow!).  All of that wonderful hardware under-utilised.
2019-3-13
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules