Please select Into the mobile phone version | Continue to access the computer ver.
A tough problem and looking for a solution! PLEASE HELP!
945 1 2019-3-27
Uploading and Loding Picture ...(0/1)
o(^-^)o
Zzyzx Films Inc
lvl.1
Flight distance : 1017 ft
United States
Offline

Help me please! Been a DJI guy since 2013 first Phantom. Know the full process of updating firmware in regards to sequence and do's and don'ts. I have a major issue. AC was stuck in travel mode. AC powers up, normal audible is heard, tail light flashes all colors, goes dark then goes solid blue. Was in travel mode and had to manually put it in flight mode, and the same issue. Both travel and flight modes with X5 attached. Downloaded firmware update and same thing. AC is up and running but with a solid Blue tail light. The front light on the X5 flashes four times goes dark and then AC tail light goes solid blue. When activating remote (yes it's been updated), remote recognizes AC, no picture and cannot take it out or put it in travel mode, no camera picture from X5, no controls of X5 what so-ever. Really at a loss here. Any help would be greatly appreciated!


Thanks in advance.
2019-3-27
Use props
Mark Guille
Captain
Flight distance : 2031818 ft
Jersey
Offline

Is it possible that you accidentally downloaded the X3 firmware instead of the X5 firmware?
2019-4-5
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules