Please select Into the mobile phone version | Continue to access the computer ver.
RC won't link to M600
849 3 5-11 05:57
Uploading and Loding Picture ...(0/1)
o(^-^)o
wm37
lvl.1
Flight distance : 80551 ft
United Kingdom
Offline

I just bought a Matrice 600 pro and fitted a zenmuse x5. I plugged the M600 into my laptop and updated lightbridge and M600 software via the DJI assist app. I turned the RC on, powed on the drone and attempted to use DJI GO via my android phone. The DJI Go app says "Remote Controller Signal Weak" eventhought the M600 and RC are sitting side by site, out doors, away from any interfernce. No informaion on the M600 is available in the settings window. In the settings window the RC settings indicated that the "Remote Controller Function" is set to "Master", Remote Controller Name is RC3753 and the Password is 2586 (these are factory set values/Values provided when I first powered on the RC and M600).  The light on the RC is red, it appears that the RC is not linked to the M600.

To re-link the RC to the M600 I followed the re-link instructions 1) enter RC Settings on the DJI go app, 2) click "Linking RC", 3) "Confirm Frequency Settings?" - click "OK"  RC started beeping flashing blue 3) pressed the "link" button on the M600 4) waited while the RC contined to beep as it timed out 5) The RC eventually timed out after 60 seconds and did not relink.

Suggestions??

Thanks All

5-11 05:57
Use props
wm37
lvl.1
Flight distance : 80551 ft
United Kingdom
Offline

Solution = uninstall lightbridge update and install 2017 version. Has anyone managed to get the newer lightbridge updates to work? there seems to be other issues with this these updates described on this forum.
5-11 06:55
Use props
djiuser_Ewon8qmIykk6
New

Offline

wm37 Posted at 5-11 06:55
Solution = uninstall lightbridge update and install 2017 version. Has anyone managed to get the newer lightbridge updates to work? there seems to be other issues with this these updates described on this forum.

I had exactly the same problem, but once I rolled back the lightbridge 2 firmware update to  the old 2017 version, things worked.
9-10 10:17
Use props
PAKman0033
lvl.1
Flight distance : 256 ft
Offline

I have a M600 Pro RTK.  Where do you hook up your laptop to update?  I had a big problem.  The remote failed and was just flashing Red.  I sent it in and apparently they fixed it, but know I can not link with the drone.  Any advice would be VERY helpful.


9-19 12:11
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules