Please select Into the mobile phone version | Continue to access the computer ver.
Having issues Calibrating my MP since this is a replacement
654 2 2019-5-18
Uploading and Loding Picture ...(0/1)
o(^-^)o
FLPilotShark
Second Officer
Flight distance : 721913 ft
  • >>>
United States
Offline

I just got a brand new MP and I am having some problems trying to calibration my forward sensors.This is the errors I am getting when I go to turn on my drone on the remote controller. The controller has been linked to the aircraft fyi!

My OVERALL Status is that the forward vision sensor calibration error. Precision Hovering and Obstacle Avoidance may fail
Also, it says to recalibrate the vision system by using the DJI assistant 2..




So I downloaded the latest version of the Dji assistant but can seem to figure it out from here.

2019-5-18
Use props
DJI Stephen
DJI team
Offline

Hello and good day. I do apologize for the trouble and thank you for reaching out. Please check if the visual lens is dirty. I would recommend setting your monitor resolution into a default mode then re-launch the application to see if this will work. It is recommended to use a monitor with a size of 14 inches or more, and a curved screen is not supposed to be used. Set the display resolution to the recommended value ( usually 14 inches for 1366*768 or 1440*900; 17 inches for 1366*768 or 1280*720; 19 inches for 1366*768 or 1440*900; 22 inches for 1680 *1050 or 1920*1080; 24 inches for 1920*1080 or 1920*1200 ). If the issue persists, please try to restore factory defaults and refresh the firmware using the DJI Assistant 2. Please let us know on the latest progress. Thank you for continued support.  
2019-5-18
Use props
FLPilotShark
Second Officer
Flight distance : 721913 ft
  • >>>
United States
Offline

I was  ABLE to finally complete both sensor calibrations on my Mavic Pro.  
2019-5-21
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules