Please select Into the mobile phone version | Continue to access the computer ver.
AEB Bracketing cancels after turning off drone.
778 0 2019-6-23
Uploading and Loding Picture ...(0/1)
o(^-^)o
makneyse
lvl.3
Flight distance : 794091 ft
United States
Offline

I am flying a Phantom 4 Pro V2.0 with up to date firmware and am using an Android device. I shoot JPG + RAW photos using AEB 3. Unfortunately, every time I power down the drone, the app does not retain the AEB setting and reverts back to single photos.

I've also tried this with shooting just JPGs or RAW files, with bracketing of 3 and 5 photos. The app still resets to single photos after the drone is turned off (and then powered back on).
The app retains the AEB settings if I turn off the remote control or disconnect the app. It only looses the setting if the drone is powered off.

I also own a Phantom 3 Pro and fly it with the same camera settings. I've never had this problem with it (but I use the DJIGO app with that instead of DJIGO4 with the P4PV2).
I noticed in a thread on another site that a Mavic user was having the same problem.

Any help or suggestions would be greatly appreciated. Thank you!
2019-6-23
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules