Anyone know how to decode the ADS-B Log from the 210V2?  I've been attempting to use the DAT decoders for the flight logs, but it seems like the ADS-B DAT is configured differently than the standard flight logs, which makes the files unparsable using the standard DAT decoders.  

Thanks!

Can you provide an example .DAT so that I could take a look?

BudWalker Posted at 6-27 15:53
Can you provide an example .DAT so that I could take a look?

Here you go.

https://drive.google.com/open?id ... 85LRScYf6McNFnaOTrS

Hello and good day El Kab0ng. I am sorry for the trouble and thank you for reaching out. I hope that you will get the best information from our valued DJI co pilots with regards to this matter. Have a safe and happy flying always.

El Kab0ng Posted at 6-28 06:37
Here you go.

https://drive.google.com/open?id=1zbtJNHlV9uYkw85LRScYf6McNFnaOTrS

I was hoping that it was the usual .DAT that would contain ADSB records in addition to the usual records. Might have been able to do something with that. I'm looking at another M200 .DAT and it has a record type containing data about communicating with the ADSB module. Although the .DAT has the specification for another ADSB record containing latitude, longitude, and altitude data  there are no records of that type.

BudWalker Posted at 6-28 09:00
I was hoping that it was the usual .DAT that would contain ADSB records in addition to the usual records. Might have been able to do something with that. I'm looking at another M200 .DAT and it has a record type containing data about communicating with the ADSB module. Although the .DAT has the specification for another ADSB record containing latitude, longitude, and altitude data  there are no records of that type.

Hm.  Ok.  I'll check the Assitant app again to see if there are any corresponding data files to go with it.  Thanks for looking into it.  If you don't mind my asking, what software were you using to analyze it?  

El Kab0ng Posted at 6-28 12:26
Hm.  Ok.  I'll check the Assitant app again to see if there are any corresponding data files to go with it.  Thanks for looking into it.  If you don't mind my asking, what software were you using to analyze it?

I'm using DatCon that I developed. DatCon is free and can be obtained here http://datfile.net/index.html

BudWalker Posted at 6-29 05:06
I'm using DatCon that I developed. DatCon is free and can be obtained here http://datfile.net/index.html

Awesome.  I use DatCon for converting the DAT files I need for mapping.  Good to speak with the the creator of such a useful tool!