DJI Tony
Administrator
Offline
|
Hi, thanks for the inquiry. There are scenarios that you may encounter if the remote controller is beeping or making an alarm. You may refer to the situation below for further check and solution.
If the problem occurs, perform the following steps:
1. Check whether the remote controller's power level is currently too low: If yes, the alarm is heard and the LED blinks red. Generally, the alarm goes off when the remote controller battery level indicator has only one space left.
2. Check whether the remote controller's control stick is in the middle position: It is recommended to toggle the control stick. If the problem persists, calibrate the remote controller.
3. Check whether the remote controller is connected to the aircraft: If the drone is not connected, the remote controller's alarm goes off after remaining in static status for 5 minutes, but there will be one beep only.
For additional information, you may encounter an alarm if the battery of your aircraft is about to be depleted. Please see the screenshot below. Hope that this would clarify your query. Thank you for your support.
|
|