Nigel54311
lvl.2
United Kingdom
Offline
|
Hi all, apologies if repeating another thread - did see a similar one to this, but was resolved.
Applied latest f/w to the aircraft - eventually stuck at 99%. Let it sty on until power died on tablet - over an hour.
On firing it all up, everything appeared to work, but no video from the bird. Also have the tri colour led flashing by the usb port on the a/c.
Have tried re-linking the a/c to the remote - which it has done - still get the tri colour led on the bird.
I can contol the gimbal from the r/c and all the data appears t come across. If i set the unit to record it will also do that from the remote.
The video does record to the sd card, just no live video back to the controller. As far as the unit is concerned it has the latest f/ware - 1.9.3 r/c.
When trying to roll back the firmware - 5 sec press on the 3 bar button, nothing, cannot see the current a/c unit f/w so nothing to roll back.
When using DJI Assistant 2 - get the same thing, unable to see the f/ware version of the aircraft, so nothing available to download - new or old.
Is there not a file that can be downloaded and copied across somewhere, unit was flying fine, just wanted to keep the fly database up to date and get stuffed.
Ta in advance, was supposed to be using today - big helps please!
Nigel.
|
|