DJI Support
Administrator
Flight distance : 2408 ft
Hong Kong
Offline
|
Overview:
Date : 2019.11.28
DJI Force Pro Firmware : v1.3.0.20
DJI Pro Wireless Receiver Firmware: v1.2.0.10
DJI Pro Assistant for Ronin (PC) : v2.0.2
DJI Pro Assistant for Ronin (Mac): v2.0.2
What’s New?
- Added camera settings for RED camera, including Start/Stop Recording, ISO, Shutter Angle, Aperture, Fps, and White Balance. Set the values according to the supported range of the camera.
Notes:
- Update the firmware through DJI Pro Assistant for Ronin by connecting the USB-C port on the DJI Master Wheels to your computer. Do not disconnect the DJI Master Wheels from the computer while updating.
- Make sure to update both the gimbal and DJI Pro Wireless Receiver to the latest firmware. Otherwise, DJI Master Wheels will not be able to control the gimbal. Restart the gimbal after the update is complete.
- If the firmware update fails, restart the DJI Master Wheels, and retry.
------------------
Overview:
- Date: 2019.08.28
- DJI Force Pro Firmware: v1.2.0.10
- DJI Pro Wireless Receiver Firmware: v1.2.0.10
- DJI Pro Assistant for Ronin (PC): v2.0.2
- DJI Pro Assistant for Ronin (Mac): v2.0.2
What’s New?
- Added ability to use the roll axis angle adjustment knob of the DJI Master Wheels to control the roll angle of the gimbal (requires DJI Ronin-2 firmware v1.5.0.80 or later).
- Added support for DJI Ronin-S and DJI Ronin-SC (requires DJI Ronin-S firmware v1.9.0.80 or later and DJI Ronin-SC firmware v1.1.0.0 or later)
Notes:
- Update the firmware through DJI Pro Assistant for Ronin by connecting the USB-C port on the DJI Master Wheels to your computer. Do not disconnect the DJI Master Wheels from the computer while updating.
- Make sure to update both the gimbal and DJI Pro Wireless Receiver to the latest firmware. Otherwise, DJI Master Wheels will not be able to control the gimbal. Restart the gimbal after the update is complete.
- If the firmware update fails, restart the DJI Master Wheels, and retry.
|
|