Please select Into the mobile phone version | Continue to access the computer ver.
Cannot change to 2.4 ghz
1976 6 2019-9-15
Uploading and Loding Picture ...(0/1)
o(^-^)o
fans6f78b7c3
lvl.1
Flight distance : 1270 ft
Offline

I cannot change to 2.4. I am using my android 5 phone connected to RC via OTG. I have tried many channels. I live in Canada in an area with very little interferance on 2.4 and 5.8 and have latest updates. App is showing channels 1-11 so am in FCC. Wifi and BT off. App says channel will be updated after wifi reset but it never changes to 2.4. Lots of older posts about this but I cannot resolve this problem.

2019-9-15
Use props
S-e-ven
Captain
Flight distance : 5910961 ft
  • >>>
Offline

Your device is what model?
And are you certain that the wifi of your phone is off and not "stucked" in the wifi of the RC?
Which can happen, even if using a cable.
You are using OTG anyway, so delete the RC's-wifi in your phone!

Also: try an older go4, perhaps that gets you somewhere then!

But one question:

You are on FCC, so WHY do you wanna change to 2.4Ghz?
The output in FCC and 5.8 is even a bit higher, as in 2.4.
And my Sparks are going in both bands, FCC-mode, to the same distance, with the same constant in stream and other parameters.
Also i really like that in auto mode, in FCC, the bird is be able to decide, which band gets the better signal, midair!
2019-9-15
Use props
DJI Tony
Administrator

Offline

Hi, we're sorry for the inconvenience. May we know what mobile device are you using? Have you tried to connect your phone via wi-fi and check if you could modify the frequency channel? You may also refer to the screenshot below for compatible devices. Please keep us posted on the latest progress. Thank you for your support.

2019-9-15
Use props
fans6f78b7c3
lvl.1
Flight distance : 1270 ft
Offline

Thanks for the replies,

Your device is what model?
Motorola Moto G

And are you certain that the wifi of your phone is off and not "stucked" in the wifi of the RC?
Which can happen, even if using a cable.
You are using OTG anyway, so delete the RC's-wifi in your phone!

Also: try an older go4, perhaps that gets you somewhere then!
I will try this.

You are on FCC, so WHY do you wanna change to 2.4Ghz?
1. Well I should get a little better range with the lower frequency.
2. I have a 2.4 ghz repeater that I want to try.

The output in FCC and 5.8 is even a bit higher, as in 2.4.
I'm not understanding this statement.

Have you tried to connect your phone via wi-fi and check if you could modify the frequency channel?
I cannot change to 2.4 via wifi because as I understand it this will cause the phone to RC connection  to change to 5.4 which my phone does not support.
I understand that my phone is not on the list.










2019-9-16
Use props
S-e-ven
Captain
Flight distance : 5910961 ft
  • >>>
Offline

That is my thought, about the "stucked in wifi?" thing:
"- cannot change to 2.4 via wifi because as I understand it this will cause the phone to RC connection  to change to 5.4 which my phone does not support.-

But you know, there is a line of Moto G's, so that is not much of a hint, here!


-I'm not understanding this statement.-
The output  in FCC and 5.8 is 28 dBm, in 2.4 it is "just" 26 dBm
https://www.dji.com/spark/info  


2.4 GHz : FCC: ≤26 dBm; CE: ≤18 dBm; SRCC: ≤18 dBm; MIC: ≤18 dBm

5.8 GHz: FCC: ≤28 dBm; CE: ≤14 dBm; SRCC: ≤26 dBm; MIC: -
2019-9-16
Use props
fans6f78b7c3
lvl.1
Flight distance : 1270 ft
Offline

Good info, thankyou S-e-ven.
2019-9-17
Use props
dji_MODDER
Captain
Flight distance : 73209 ft
Offline

with an older version you can change the channel ,4.1.14, change channel, then upgrade to 4.1.15, or use a mod version 4.1.15,
or boost your Spark with new DJI super patcher 2.0
https://github.com/brett8883/DJI_Super-Patcher
2019-9-18
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules