Please select Into the mobile phone version | Continue to access the computer ver.
New Matrice 200 Series V2 Firmware Released (09/16/2019)
1034 2 9-16 05:05
Uploading and Loding Picture ...(0/1)
o(^-^)o
DJI Support
DJI team
Flight distance : 2408 ft

Offline

Overview:
  • Date: 2019.09.16
  • Aircraft Firmware: v01.00.0590
  • Remote Controller Firmware: v01.00.0590
  • D-RTK 2 Mobile Station for Matrice Series Firmware: v01.00.0590
  • DJI Pilot App: v1.5.0
  • DJI Assistant 2 For Matrice: Windows v2.0.8, Mac v2.0.8

What’s New?
Aircraft:
  • When using the X7 camera:
  • Added the photo ratio of 3:2 and a mechanic shutter option. *
  • The photos captured in each flight mission are saved to a subfolder under the “survey” folder in the microSD card.
  • Added lens calibration in manual focus mode when using the X5S or X7 cameras.
  • Added a function to adjust the shutter, aperture, and ISO values using the camera setting dial and corresponding buttons on the remote controller when using the X4S, X5S, or X7 cameras.
  • Reduced camera display jitter when flying with the X5S and a zoom lens, such as Olympus 14-42 mm or Panasonic Lumix 14-42 mm.
  • Reduced aircraft fan noise when taking off in the simulator in DJI Assistant 2.
  • Fixed the abnormal aircraft status when taking off with the Downward Vision System obstructed.
  • Fixed the issue where the RTH altitude could not be set to the max value after GEO zones have been unlocked.
  • Fixed the rare issue where there was no camera preview in the app when using a PSDK payload.
  • Fixed the issue where calibration failed after the GPS was interfered when using the M210 V2 with an external GPS kit.
  • For the M210 RTK V2:
  • Improved mapping accuracy when using the X7 camera with a 35 mm lens or 24 mm lens.
  • The PPK raw data will be saved to the same folder as the photos.
  • Added the detailed RTK status information in the photo information.

Remote Controller:
  • Added function to disable the gimbal control using the left and right dials on the remote controller during mission flight to avoid false trigger.
  • Added a function to transfer the PSDK data to a display device via HDMI.
  • Added a function to customize the control stick mode for the Secondary remote controller in Dual Remote Controller mode. *
  • Added a function to focus in manual focus mode by using the focus adjustment knob. *
  • Added a function to recenter the gimbal pan. Tap the corresponding button in gimbal settings in the app to recenter, only the gimbal pan. *
  • D-RTK 2 Mobile Station for Matrice Series:
  • Added a data copy function. Connect the D-RTK 2 to the computer to copy the RTCM data directly.

Notes:
  • Make sure that the firmware for the aircraft, remote controller, and D-RTK 2 Mobile Station for Matrice series (if in use) is up-to-date. Otherwise, they will not work together.
  • To update the firmware for Zenmuse X4S, X5S or X7, connect it to Gimbal Connector I.
  • Download the firmware to a microSD card to update the firmware for Zenmuse Z30, XT or XT2.

* DJI Pilot app of v1.5.0 or later is required.




9-16 05:05
Use props
patiam
First Officer
  • >>>
Offline

Typo in thread title.
(20190917 ETA: fixed)
9-16 13:15
Use props
Nik Anderson
lvl.1

Offline

Did the "Conversion" Error Issue get fixed while conducting a mission within DJI Pilot?
9-17 06:12
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules