c

Thanks for sharing your work with us. For a friendly reminder,  please be mindful that it's not recommended modifying the firmware as this may change the behavior of your drone. Thank you for understanding.

DJI Tony Posted at 10-8 13:27
Thanks for sharing your work with us. For a friendly reminder,  please be mindful that it's not recommended modifying the firmware as this may change the behavior of your drone. Thank you for understanding.

Of course but the settings out of the box are not ideal.  Even the gimbal settings out of the box of the M2P and Inspire 1 X3 are wrong.  Idk how anyone can control smoothly w/ those settings.  Maybe if you have 0ms delay at the factory when designing it's great but when you factor in the delay it takes from an input to the feed it makes no sense.

I just tested the dampening gain to 120 and it made the drone solid as a rock w/o oscillations but I didn't fly fast enough to see.  It was just fly a bit and hovered.  Smoother than ever.  Probably due to lack of wind.

Thanks for sharing

AntDX316 Posted at 10-8 13:36
Of course but the settings out of the box are not ideal.  Even the gimbal settings out of the box of the M2P and Inspire 1 X3 are wrong.  Idk how anyone can control smoothly w/ those settings.  Maybe if you have 0ms delay at the factory when designing it's great but when you factor in the delay it takes from an input to the feed it makes no sense.

Hi, thanks for the prompt reply. Upon receiving the DJI products, it would automatically be set on the default mode. You may change the settings on the app depending on our needs when using the particular drone. Thank you for your support.