I could use some advice on getting a video signal transmited from my camera mounted in a DJI Zenmuse z15 5D HD.  I can get the iOSD to work, but no camera image.

  

Equipments includes:

  

DJI Zenmuse z15 5D HD gimbal

  

Canon 5D MkIII

  

DJI s1000+

  

DJI A2

  

  

  On the gimbal itself, shouldn’t the LED lights be blinking and not solid ..The AV/HDMI is set to AV, but it acts the same either way.  I switched video input cables between the GMU and the iOSD, and that didn’t make a difference.  I believe I have the ground and video wires connected correctly.  I also had an extra DJI Zenmuse 15 5D HD gimbal to try that instead of the other, so I switched it out with no change.

  

  

  If anybody has any advice, I would sure appreciate it, as I am stumped.

I could use some advice on getting a video signal transmited from my camera mounted in a DJI Zenmuse z15 5D HD.  I can get the iOSD to work, but no camera image.

  

Equipments includes:

  

DJI Zenmuse z15 5D HD gimbal

  

Canon 5D MkIII

  

DJI s1000+

  

DJI A2

  

  

  On the gimbal itself, shouldn’t the LED lights be blinking and not solid ..The AV/HDMI is set to AV, but it acts the same either way.  I switched video input cables between the GMU and the iOSD, and that didn’t make a difference.  I believe I have the ground and video wires connected correctly.  I also had an extra DJI Zenmuse 15 5D HD gimbal to try that instead of the other, so I switched it out with no change.

  

  

  If anybody has any advice, I would sure appreciate it, as I am stumped.