Please select Into the mobile phone version | Continue to access the computer ver.
RC does not work
988 8 2019-10-24
Uploading and Loding Picture ...(0/1)
o(^-^)o
djiuser_SrrIUWy2ZhDK
lvl.4
Flight distance : 4442 ft
Turkey
Offline

Hi,
Even though,I connected to my spark via RC,it does not send signals to the bird.Gimbal works but take off not.
What is the solution?
There is a way to upgrade the RC itself?
Thanks everybody.
2019-10-24
Use props
S-e-ven
Captain
Flight distance : 5910961 ft
  • >>>
Thailand
Offline

Check the FW Versions of Bird and RC. Usually the Go4 would tell you to upgrade. Ca you fly it just with the phone, no RC in the circle?
2019-10-24
Use props
djiuser_SrrIUWy2ZhDK
lvl.4
Flight distance : 4442 ft
Turkey
Offline

S-e-ven Posted at 10-24 03:40
Check the FW Versions of Bird and RC. Usually the Go4 would tell you to upgrade. Ca you fly it just with the phone, no RC in the circle?

I can take it off by the phone but it deosn't  rise 1.5 meters,instead it flies without being controlled neither vy the phone nor the rc.
What is FW version.
Thank you.
2019-10-24
Use props
djiuser_SrrIUWy2ZhDK
lvl.4
Flight distance : 4442 ft
Turkey
Offline

djiuser_SrrIUWy2ZhDK Posted at 10-24 04:51
I can take it off by the phone but it deosn't  rise 1.5 meters,instead it flies without being controlled neither vy the phone nor the rc.
What is FW version.
Thank you.

Thank you captain, I did somehow.
2019-10-24
Use props
ssylca44
Captain
Flight distance : 434721 ft
Canada
Offline

Can you try with an OTG cable?
2019-10-24
Use props
Wolferl
Captain
Flight distance : 23793 ft
Germany
Offline

djiuser_SrrIUWy2ZhDK Posted at 10-24 04:51
I can take it off by the phone but it deosn't  rise 1.5 meters,instead it flies without being controlled neither vy the phone nor the rc.
What is FW version.
Thank you.

Hi,

Check this thread for the latest available firmware versions.

Cheers,
Wolferl
2019-10-24
Use props
S-e-ven
Captain
Flight distance : 5910961 ft
  • >>>
Thailand
Offline

You should first try, to re-flash the quads firmware from a computer , methinks
in the second half of the video:

2019-10-24
Use props
DJI Tony
Administrator

Offline

HI, we're sorry for the inconvenience. May we know if you're getting an error message? I would like to clarify that you could control the gimbal of the Spark using the remote controller, however, it wouldn't allow you to perform the control stick command? I would recommend doing the RC calibration to check if all controls are working. Also,  Please refer to this screenshot below for further check. Thank you for your support.

2019-10-24
Use props
S-e-ven
Captain
Flight distance : 5910961 ft
  • >>>
Thailand
Offline

djiuser_SrrIUWy2ZhDK Posted at 10-24 04:51
I can take it off by the phone but it deosn't  rise 1.5 meters,instead it flies without being controlled neither vy the phone nor the rc.
What is FW version.
Thank you.

As it is neither to control (aside start) with RC nor with phone, it seems to be the bird.
Re-flash the firmware for a try!
2019-10-24
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules