Haii.. Anyone here ever using DJI PILOT APPS for flying mavic 2pro. And what is the diffrent between dji pilot with dji go 4 apps.. Thanks

Last I tried it told me the M2P was not supported only the enterprise could be added.

DAFlys Posted at 10-25 01:35
Last I tried it told me the M2P was not supported only the enterprise could be added.

Noted.. Thanks for the info..

I have used it for Mavic 1 Pro.
It has way points and mapping inside.
The main reason I use it is because mapping.
There are fewer flight mode in but suits better if you use your drone for work.

Alenthien05 Posted at 10-25 01:38
Noted.. Thanks for the info..

Im sure when it first came out it worked but was missing all the fly modes etc so I didnt continue with it,  went back to try it recently as I heard it had grid flying but no luck.

DAFlys Posted at 10-25 01:42
Im sure when it first came out it worked but was missing all the fly modes etc so I didnt continue with it,  went back to try it recently as I heard it had grid flying but no luck.

Are you on iOS?

G_Sig Posted at 10-25 01:46
Are you on iOS?

Yes. Iphone /ipad user here.

Hi, thanks for the inquiry. Currently, DJI Pilot supports M200 series, Phantom 4 series (currently can not be installed on the remote controller with screen of Phantom 4 Pro +, also does not support Phantom 4 Pro V2.0 and P4RTK), M600, Inspire 2, Mavic Pro , Mavic Pro Platinum , Mavic 2 Enterprise，Phantom 4 RTK(non-built-in screen controller).

The  Mission Flight  just support M200 Series and Mavic 2 Enterprise .

Note: Currently, iOS DJI PILOT only supports MAVIC 2 Enterprise series, and the above-mentioned aircraft are supported by Android DJI PILOT.

DJI Tony Posted at 10-25 07:39
Hi, thanks for the inquiry. Currently, DJI Pilot supports M200 series, Phantom 4 series (currently can not be installed on the remote controller with screen of Phantom 4 Pro +, also does not support Phantom 4 Pro V2.0 and P4RTK), M600, Inspire 2, Mavic Pro , Mavic Pro Platinum , Mavic 2 Enterprise，Phantom 4 RTK(non-built-in screen controller).

The  Mission Flight  just support M200 Series and Mavic 2 Enterprise .

Hi!

I would like to use DJI PILOT with Inspire 1 (Zenmuse X3) and a Galaxy Tab Active2 but the X3 is not integrated by default. Is there any compatibility issue?
I could add it as a custom camera but also not sure for the sensor size.
Photo size 4000x3000
Sensor size ?
Focal length 3.6 mm ?
Min. interval ?

Thanks a lot for your advise!

ddraun Posted at 10-28 01:19
Hi!

I would like to use DJI PILOT with Inspire 1 (Zenmuse X3) and a Galaxy Tab Active2 but the X3 is not integrated by default. Is there any compatibility issue?

Sensor Type:
CMOS (1/2.3 inch)

Shutter:
Rolling

Sensor Dimensions:
6.17 mm x 3.47 mm (0.243 in x 0.136 in)

Image Resolution:
4096 x 2160
3840 x 2160
1920 x 1080
1280 x 720

Output Type:
MOV
MP4


This might help something.

ddraun Posted at 10-28 01:19
Hi!

I would like to use DJI PILOT with Inspire 1 (Zenmuse X3) and a Galaxy Tab Active2 but the X3 is not integrated by default. Is there any compatibility issue?

Sorry posted a wrong link so I deleted it.
https://en.wikipedia.org/wiki/Image

DJI Tony Posted at 10-25 07:39
Hi, thanks for the inquiry. Currently, DJI Pilot supports M200 series, Phantom 4 series (currently can not be installed on the remote controller with screen of Phantom 4 Pro +, also does not support Phantom 4 Pro V2.0 and P4RTK), M600, Inspire 2, Mavic Pro , Mavic Pro Platinum , Mavic 2 Enterprise，Phantom 4 RTK(non-built-in screen controller).

The  Mission Flight  just support M200 Series and Mavic 2 Enterprise .

We need DJI Pilot support for Mavic 2 Pro/Zoom on the DJI Smart Controller. DJI should not cripple the software/hardware for it's own users. I want to be able to 2D map with DJI Pilot for S&R operations. DJI focus nowadays on professional use of their drones - yet DJI cripple them for their users...

If you don't want your customers to fly DJI Pilot - your own software, at least permit installation of third party software on the Smart Controller, for instance Pix4D, Drone Deploy or any of the others!

G_Sig Posted at 10-28 02:05
Sensor Type:
CMOS (1/2.3 inch)

Thank you!