Hi

Ive tried to upgrade firmware on my phantom 3 advanced several times, but it doesent seem to work. Ive put the file on the memorycard(nothing else on the card), and put it in to the drone, but the red flash is just blinking red. Now it have also startet to make a terrible beeping noice everytime i try to turn it on. Under this text you will se the text from the text file that appears when i try to upgrade. Is there anyone else that have had the same problems, or maby knows what to to? The drone worked before ive tried to upgrade, but right now it is totally useless..


Hoping anyone can help me with this one!



========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3S_FW_V01.10.0090.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Upgrading ...

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Upgrading ...

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Upgrading ...

========== 2014.01.01 00:04:50 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Upgrading ...

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Upgrading ...

Youtube is actually your best friend on this ... watch such videos as "Beep from Hell" etc. where people end up with P3's beeping and not working ...

You may have to search and watch quite a few - but I am sure one will mimic your problem and help. Its very difficult for us to advise here as we cannot know all the bits and pieces that were done and after ...