Hi Everyone, This is my first post so forgive me if I don't get it correct. My friend has a Mavic 2 Pro but yesterday he had a disaster, he lost sight of his drone and pressed return to home, he had set the height at 120ft, however during the return we think the drone clipped a lighting conductor on top of a church and crashed on the top of the tower which has no roof access. He is considering hiring a octocopter crew to recover the drone but they need to know the gross weight with battery of the Mavic 2 pro. Can anyone help us with this.
Thanks

The specs are at the DJI store.

Why not have a buddy with a drone fly up there and have a look see first before you go hiring someone? yes?

907 grams take off weight.

BobB Posted at 11-7 02:35
The specs are at the DJI store.

Why not have a buddy with a drone fly up there and have a look see first before you go hiring someone? yes?

Yes I am flying over it tomorrow with my Phantom Pro 4 (weather permitting) to see the full situation.

fans48f0c1a5 Posted at 11-7 02:35
907 grams take off weight.

Thank you that's just what he needs.

Nigel_Gregory Posted at 11-7 02:53
Thank you that's just what he needs.

A Phantom 4 could lift the Mavic 2 Pro,  check out this example of it carrying slightly over 1kg.

Good luck!

DAFlys Posted at 11-7 03:33
A Phantom 4 could lift the Mavic 2 Pro,  check out this example of it carrying slightly over 1kg.

https://www.youtube.com/watch?v=roFoMkE5XmI

We are seriously considering this with a release system just in case!

DAFlys Posted at 11-7 03:33
A Phantom 4 could lift the Mavic 2 Pro,  check out this example of it carrying slightly over 1kg.

https://www.youtube.com/watch?v=roFoMkE5XmI

We are seriously considering this with a release system just in case!

Hi, thanks for the inquiry. The takeoff weight of the Mavic 2 Pro is 907g and we highly recommend contacting our support upon retrieving the drone to check the status and repair the drone in any case that it has damaged. For further details of our Mavic 2 Pro, please refer to this link: https://www.dji.com/mavic-2/info#specs Thank you for your support!

Nigel_Gregory Posted at 11-7 06:05
We are seriously considering this with a release system just in case!

You need to make a hook like this -