So sick and tired of this.

I am NOT going through this with the Mavic Mini as I have with the Mavic Air

Gimbal will not hold the horizon.

And, the craft YAWs without any stick input.

Advice anyone?

I am not sending this into service 7 times under warranty like my 2 Mavic Air

Video is 10 minutes compressed into 1

https://youtu.be/1uFvkUJ8iWY

Hi, thank you for reaching out and we do apologize for the trouble. Can you please try to perform the gimbal and IMU calibration to see if the problem persists? Also, you can recalibrate your RC to see if the YAW issue will still persist. Please keep us posted. Thank you for your understanding.

DJI Gamora Posted at 11-24 09:09
Hi, thank you for reaching out and we do apologize for the trouble. Can you please try to perform the gimbal and IMU calibration to see if the problem persists? Also, you can recalibrate your RC to see if the YAW issue will still persist. Please keep us posted. Thank you for your understanding.

Gimbal, IMU, compass and RC has been calibrated.

pmshop Posted at 11-24 10:48
Gimbal, IMU, compass and RC has been calibrated.

How about calibrating the gimbal manually? The horizon can be adjusted.
Was it windy outside?

Here it is with preview

I have to say my MP has issues with the horizon.
So I'm used to correcting it in post.
Mainly occurs when flying sideways.

Also it does move on its own.... (sometimes)
Not sure why.

DJI Gamora Posted at 11-24 19:29
How about calibrating the gimbal manually? The horizon can be adjusted.
Was it windy outside?

I would like the horizon to be level when I finish calibration
The video shown was with 5mph wind.
Nothing that would kick it off level.

Montfrooij Posted at 11-25 00:35
I have to say my MP has issues with the horizon.
So I'm used to correcting it in post.
Mainly occurs when flying sideways.

This was a stationary flight.
Testing the Mavic Mini's ability to do an aerial time lapse

pmshop Posted at 11-25 03:36
This was a stationary flight.
Testing the Mavic Mini's ability to do an aerial time lapse

Yeah.
I read it.
Strange.
Although not uncommon for DJI drones. (at least, not with mine)
Not sure why btw.

pmshop Posted at 11-25 03:35
I would like the horizon to be level when I finish calibration
The video shown was with 5mph wind.
Nothing that would kick it off level.

But did you ever try to calibrate the gimbal manually just for us to know if you still experience the same issue? You can try to adjust it manually if the auto-calibration will not work. Please keep us posted. Thank you!

DJI Gamora Posted at 11-26 12:42
But did you ever try to calibrate the gimbal manually just for us to know if you still experience the same issue? You can try to adjust it manually if the auto-calibration will not work. Please keep us posted. Thank you!

Yes it is working, I am running about -2 to -5 roll.

pmshop Posted at 11-26 18:45
Yes it is working, I am running about -2 to -5 roll.

We're glad to know that it is now working. Please don't hesitate to reach us if you have other inquiries or concerns. Thank you for your continued support!