DJI Mindy
Administrator
Offline
|
Hi there, sorry for the troubles, did you update the firmware when you opened the box? If yes, please make sure the firmware of RC and aircraft all has been updated to the latest version. Then follow the steps below to link them.
Linking by DJI Fly:
1. Power on the remote controller and aircraft.
2. Open DJI Fly on a mobile device, go to the camera view page, enter the "Shortcuts" or "Control" menu, and then tap the "Connect to Aircraft" button. The remote controller's battery level indicators will blink from left to right and the remote controller will make beeping sounds, indicating that it has entered the linking state.
3. Press and hold the aircraft's power button for about four seconds until the battery level indicators blink from left to right, which indicates that the aircraft has entered the linking state.
4. Wait for a few seconds, and then the aircraft will link to the remote controller.
Linking by Power Buttons:
1. Power on the remote controller and aircraft.
2. Press and hold the power button of the aircraft and remote controller for four seconds respectively. The aircraft's battery level indicators will blink from left to right, indicating that it has entered the linking state. The remote controller's battery level indicators will blink from left to right and the remote controller will make beeping sounds, indicating that it has entered the linking state.
3. Wait for a few seconds, and then the aircraft will link to the remote controller.
|
|