Hello all,
Just wondering if you all knew of somthing that could assist with the issue that I am having.
I am trying to get the DJI Digital FPV goggles to show the analog video input.
I have verified the analog source is working, and that the av-in cable is good.
I can plug the cable to either my other analog goggles or a normal fpv monitor and it shows a picture fine.

When I plug it into the DJI goggles, and switch my goggles to av-in in the settings menu.  I just get a black screen with no video.
The brightness and saturation settings at the top left are present..which means it is in av-in mode for sure.

Also the funny thing is, if I press the record button...it will record the analog signal.
I can also play it back in the goggles.  Which means the signal is actually making it into the goggles.
But the live view does not show in the goggles for some reason.

Anyone else run into this issue?

OK I have narrowed it down.  The AV-IN works with the version 100 firmware.  But as soon as I upgrade back to v 200 firmware the av-in stops working.

Go to Settings / Display / Display / change Zoom out to 80% => go back to AV-IN ... then you can see your image ... After this, you can Zoom out back to 100% and now your AV-IN will work. It's a bug.

I had to reduce to 50 %   woulndt work at 80...   Thanks though for the heads up!

Hello pRo_lama
Thanks for that.
I had to use 60% and it worked.
I tried 80% and 50% and it did not work.
So i went from 90% all the way down to 60% and it worked.

Thanks so much for this info.

OMG this worked for be as well. I set it to 90 and just like that I had video. Thanks guys. I was about to send back my rapidfire.

Hy i have the same problem but nothing happens if i zoom in or out?

I have the same issue and cannot it get it work

Hi everyone,

Did someone or dji solve this AV-IN issue ? On my side my side I have this (picture attached) and on another support the image was fine


Thanks in advance

El_Mario Posted at 3-20 03:13
Hi everyone,

Did someone or dji solve this AV-IN issue ? On my side my side I have this (picture attached) and on another support the image was fine

I am having the same problem.

Same here, blue screen ...

Same problem. Shows ripples when there is a signal. I tried to send a signal both with an external module and with another FPV monitor. Only ripples. Can someone tell me what it could be?

spak Posted at 2019-12-29 23:33
OK I have narrowed it down.  The AV-IN works with the version 100 firmware.  But as soon as I upgrade back to v 200 firmware the av-in stops working.

How were you able to downgrade the firmware? I cannot find an option to do so.

MrADOY Posted at 4-2 09:53
Same here, blue screen ...

Hi I am having same too blue screen. Did you managed to solved yours?