I have been working with this bird since 2017.  Have put ALOT of images thru it......10s of Thousands

I was at a job to do a GO4 360 Pano set......EV=0    WB= Sunny   ISO= 100

The picture feed looked fine......then when I started the Pano, everything was washed out!!  Came home ( after completing the job with M2P ) and the next day did all calibrations.

After some testing, it is still much lighter imaging than it should be.....The Pano app takes over the camera.....anyone, any thoughts?

Washed Out

Are you sure that the live view looks normal?

The most likely explanation is that you have accidentally set your Exposure Compensation to overexpose by a couple of stops.
Look at the line of camera data in the app when you have the drone connected.
Find where it shows EV and underneath that is a number.
Yours probably shows something like +2.0 or +3.0.
Dial it back to zero.

Labroides Posted at 1-6 19:11
Are you sure that the live view looks normal?

The most likely explanation is that you have accidentally set your Exposure Compensation to overexpose by a couple of stops.

Lab!!  Thank you,  I do recall "now" changing something in the settings......

I took it off AUTO, then changed something........forgot all about that.....MUCH appreciated.

I'll check that Tuesday.....I have a construction progress job at 11am with the M2P, and will go check the setting afterwords.
Randy