https://caddxfpv.com/products/caddx-vista

PRODUCT SPECIFICATIONS:

Weight:
Vista Kit(camera included): 29g
Antenna. 3.5g

Dimensions:
Vista Kit: 30x29x13mm
Camera: 27.4x21.1x20.1mm
Coaxial Cable: 80mm

Operating Frequency:
5.725-5.850GHz

Transmitter Power(EIRP):
FCC/SRRC/MIC: <30dBm
CE: <14dBm

Min.latency(end-to-end):
Low Latency Mode(720p 120fps): 21-28ms;
High Quality Mode(720p 60fps): 30-40ms

Max.Transmission Distance:
FCC/SRRC: 4km;
CE: 0.7km

I/O Interface:
USB-C,IPEX,3-in-1port, microSD card slot

Supported Flight control System:
F3.F4.F7

Operating Temperature Range:
32° to 104°F (0° to 40°C)

Input Power:
7.4-26.4V

DJI Camera:
Sensor: 1/3.2" CMOS;
Effective Pixels:4M
Lens:2.1mm,f/2.1
Shutter:Rolling shutter
ISO:150:100-25600
FOV:150°(D);122°(H);93°(V)

THE BIG QUESTION: How much performance is sacrificed by going to a single antenna?

I like what looks like a mechanical plate that screws over the connector to keep the antenna connector in place.

At 80mm, the camera wires look pretty short.  Might JUST fit in a 5 inch build.

mc54 Posted at 1-10 10:34
THE BIG QUESTION: How much performance is sacrificed by going to a single antenna?

I like what looks like a mechanical plate that screws over the connector to keep the antenna connector in place.