Landing Gear raising automatically when coming into land
787 0 2020-2-7
Uploading and Loding Picture ...(0/1)
o(^-^)o
MajorsMavic
lvl.1
Flight distance : 4166627 ft
South Africa
Offline

Hi there,
I have been flying a M600 for a few days now and today I had a strange experience. I did an auto mission and everything was fine until I came into land.
at about 2 inches off the ground just before I was about to touch down, the landing gears raised and the drone hoverd for a moment and then gaind altitude to about 10m and then stayed there. I had no control and no input from the controlers, I swithced in and out of S mode and then was able to tak control and land. I continued after this with 2 more auto flights and on the last one this happend again but this time at about 8m off the gorund. I switched to S mode and out again and was able tot take control and land.

Any ideas why it would have done this. please advise.
2020-2-7
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules