Tried all firmwares , nothing changes except behavior , dont know how to solve it

What is the issue you are referring to?

When i roll the drone , the camera dont stabilize correctly , there is a great delay until it goes straight

in min 0:50 you can see the error

There are no errors in the app, carried out calibration of Imu and Compass, I have tried everything, there are no messages of motor overload in the gimbal, calibrate sensors in Dji ASSISTAN .... I have only noticed a different behavior change in each firmware , the problem is not fixed

the camera in lateral movements / forward and backwardis works perfect, but when I turn the drone ( 01:43), the stabilization of the gimbal until it goes straight suffers a great delay (02:20)

Yeah, I noticed.
Weird.

Camera gimbal advanced settings. "Gimbal Yaw Settings" I have my Gimbal Yaw Synchronous follow turned off.

Out of interest what is yours set to ?

ksqlsurf.com Posted at 3-9 03:13
Camera gimbal advanced settings. "Gimbal Yaw Settings" I have my Gimbal Yaw Synchronous follow turned off.

Out of interest what is yours set to ?

same here , not changes or improve changing this setting

Nebuchadnezzar Posted at 3-9 03:17
same here , not changes or improve changing this setting

Odd.

And I assume that you haven't changed any of the gimbal gain settings for smoother movements etc.
(I suppose really if you had, that would have been the first thing you checked).
There are many more experienced guys on here, who should be online later.

It looks to me as if you have the gimbal set to 'Follow Mode' rather than 'FPV' mode (or vice versa, I can't remember which).

Geebax Posted at 3-9 13:17
It looks to me as if you have the gimbal set to 'Follow Mode' rather than 'FPV' mode (or vice versa, I can't remember which).

Video was in Normal mode, not Fpv

ksqlsurf.com Posted at 3-9 09:18
Odd.

And I assume that you haven't changed any of the gimbal gain settings for smoother movements etc.

I tried all 3 configurations , nothings changes .. camara have a strange behavior

in min 02:14 i did a orbit with the mode point on interest , notice how the camera won't stabilize correctly

Horizon tilts , the acelerometer mainboad problem maybe

Nebuchadnezzar Posted at 3-10 01:14
Horizon tilts , the acelerometer mainboad problem maybe

Did you get to the bottom of it ?

ksqlsurf.com Posted at 3-16 07:41
Did you get to the bottom of it ?

Nope , there are another oppinions about factory defect ..

Another User , same problem  :

Nebuchadnezzar Posted at 3-16 22:51
Another User , same problem  :

It's very odd, especially if you haven't changed any settings.

I remember altering the gain/speed etc on mine when I first got it, along these lines(this is a P4):




I assume you have tried resetting everything back to default as well ?

ksqlsurf.com Posted at 3-17 03:02
It's very odd, especially if you haven't changed any settings.

I remember altering the gain/speed etc on mine when I first got it, along these lines(this is a P4):

yes i did mate

02:30 the problem is exacyly when i turn the done ( roll ) , the gimbal dont stabilize correctly and in time... there is a delay in my camera

Nebuchadnezzar Posted at 3-17 03:26
yes i did mate

Fair enough, you would think, that one of the DJI support people would be able to offer some advice, although that usually seems to get left to some of the more experienced users on here.

ksqlsurf.com Posted at 3-17 06:38
Fair enough, you would think, that one of the DJI support people would be able to offer some advice, although that usually seems to get left to some of the more experienced users on here.

Im experienced user here long time

This is most a Firmware/Software problem , camera is ok , 3 motors (yaw , pitch and roll) are ok ...

Nebuchadnezzar Posted at 3-17 09:29
Im experienced user here long time  

This is most a Firmware/Software problem , camera is ok , 3 motors (yaw , pitch and roll) are ok ...

That I don't doubt, but you find people on here that might have experienced similar issues or repair drones and have come across the same types of problems/issues.

Nebuchadnezzar Posted at 3-17 09:29
Im experienced user here long time  

This is most a Firmware/Software problem , camera is ok , 3 motors (yaw , pitch and roll) are ok ...

I have the same problem with my P4 PRO.. did you get an answer from someone yet ?

Weecked Posted at 7-26 08:07
I have the same problem with my P4 PRO.. did you get an answer from someone yet ?

no answers or solutions ...  they know this is a bug ....