Hello, in quarantine time,
I decided to make a video of 2 accessories that I find spectacular for the Mavic Mini.
Hope you like it

Be safe. Thank you for sharing your views of these products. It appears, to me, that the prop guards for the front are under pressure (bending) when the guard is snapped in place. Maybe it is the camera view. Thanks again.

Very neat and practical, nice protection for gimbal. Good luck and keep safe all Portuguese people.

djicheaha Posted at 3-19 05:31
Be safe. Thank you for sharing your views of these products. It appears, to me, that the prop guards for the front are under pressure (bending) when the guard is snapped in place. Maybe it is the camera view. Thanks again.

Hello,
Thank you very much for watching the video. The Propeller Guard, although tight, does not force the propellers. it’s their shape and the camera’s angle. Stay safe

hallmark007 Posted at 3-19 05:51
Very neat and practical, nice protection for gimbal. Good luck and keep safe all Portuguese people.

Thank you so much for watching!!
Everyone around the world need to stay safe right now!
Thanks again

Here are my fancy prop guards.  Strips of gaffer tape with paper strips in the middle so they stick only to the drone body and not the props.  Cost: about 3 American pennies.

Who is narrating this, Putin?

Kinda like the gimbal cover.

I think SunnyLife pretty much nailed every accessory for the Mavic Mini, I currently own of them:

- ND PL filters
- Neck strap for the RC
- Parabolic reflectors and MD display hood

But... to be truthfully honest I have a reservation for the propeller holders. Considering how delicate the Mavic Mini propellers are, and how an (almost) indistinguishable profile change can cause ESC errors (that can lead to DROPs and Aircraft losses), I would be quite afraid of using something that pins the props against the body as prolonged contact might actually induce a change of shape.

For my Mini I use pre-creased micro-Velcro like cable-ties so I can comfortably store it in its original DJI carrying case (Fly More kit), and the ties don't exert any significant force against the props as they just serve to keep them bundled together when they have the tendency to move about.

m0bius Posted at 3-19 09:37
Here are my fancy prop guards.  Strips of gaffer tape with paper strips in the middle so they stick only to the drone body and not the props.  Cost: about 3 American pennies.
[view_image]

Amazing idea!!
Now I’m have in my mind something similar!!
Thanks for watching and for give that idea

AE1M Posted at 3-19 10:04
Who is narrating this, Putin?

Noooo.. I don’t have to much experience to talk for a recorder!! I try my best... but to be honest, it’s weird to ear it!
Thanks for watching

BigBird-2 Posted at 3-19 11:05
Kinda like the gimbal cover.

It’s a great idea (for me) protect the gimbal!!
Thanks for your time watching my video and for your feedback

m80116 Posted at 3-19 12:31
I think SunnyLife pretty much nailed every accessory for the Mavic Mini, I currently own of them:

- ND PL filters

Totally agree with you!!
Now I have an idea for Mavic mini propellers...
Just have to find my tape (that I use to hold my skis)
Thanks for watching and for your feedback

As annoying is it is to have the propellers flop all over the place, I've decided not to use straps like that on my Mini.  I'm afraid the tension will warp the delicate arms and the propellers and eventually cause the props to hit the body.  I also have that hood; it makes the Mini more susceptible to wind.

I must agree with @m80116:

Considering how delicate the Mavic Mini propellers are, and how an (almost) indistinguishable profile change can cause ESC errors (that can lead to DROPs and Aircraft losses), I would be quite afraid of using something that pins the props against the body as prolonged contact might actually induce a change of shape.

So I printed such things:

Be safe out there.
And post more content
Nice one.

Corger Posted at 3-19 16:27
As annoying is it is to have the propellers flop all over the place, I've decided not to use straps like that on my Mini.  I'm afraid the tension will warp the delicate arms and the propellers and eventually cause the props to hit the body.  I also have that hood; it makes the Mini more susceptible to wind.

Tottaly agree with you.. but This tape has some slack.
Now i thinking about the questions about propellers.
Some users gave me some ideas
Thanks for watching and your feedback

Cobra_rc Posted at 3-19 23:53
I must agree with @m80116:

It works with the fly more combo??
Thanks for watching and sharing your idea

Montfrooij Posted at 3-20 00:07
Be safe out there.
And post more content
Nice one.

Once again, thanks for your feedback!!
I try to improve some content, but with state of art worldwide, its dificult

It works with the fly more combo??

You mean the case? Probably not.

Cobra_rc Posted at 3-20 03:07
You mean the case? Probably not.

[view_image]

yes.. the case, missing that word.

I will try to improve.
Thanks for sharing another photo

wh1chocl4 Posted at 3-20 02:45
Once again, thanks for your feedback!!
I try to improve some content, but with state of art worldwide, its dificult

Yes, I know.
Although I can go out and fly right now.
So I might do that tomorrow.

Do you have a link to the gimbal hood?

Cheers!
=C=

Cal Evans Posted at 3-20 05:35
Do you have a link to the gimbal hood?

Cheers!

send you Personal message
I dont know if i could put the link on this forums
cheers

Montfrooij Posted at 3-20 04:44
Yes, I know.
Although I can go out and fly right now.
So I might do that tomorrow.

i m at home with my kids
for the next few weeks, i think i will fly inside my home with propellers guards

wh1chocl4 Posted at 3-20 05:56
i m at home with my kids
for the next few weeks, i think i will fly inside my home with propellers guards

Yeah, same here.
Although I hope to get airborne tomorrow