Please select Into the mobile phone version | Continue to access the computer ver.
OSD Voltage Adjustment
946 5 2020-3-31
Uploading and Loding Picture ...(0/1)
o(^-^)o
shredzoo7
lvl.1
Flight distance : 67392 ft
Canada
Offline

Hey Everyone,

I've tried doing a search, but nothing.

Am I just missing it, or is there no where to calibrate the goggle voltage OSD. My goggle voltage in my OSD is about 0.5V's too low.

Thanks!


2020-3-31
Use props
Tom_A
Captain
Flight distance : 899951 ft
  • >>>
United States
Offline

I would expect the setting to be on the battery tab in Betaflight. I have never needed to change this, but I did have to change current here.
2020-4-1
Use props
roady123
lvl.4

Germany
Offline

Same here, the goggles voltage is lower then the goggle battery voltage.
2020-4-2
Use props
Xviews
Captain
Flight distance : 229255 ft
Germany
Offline

4S
Goggle         14,6V
BATT        15,16V
                0,56V

3S
Goggle        10,9V
BATT        11,39V
                0,49‬V

same, after the last update
2020-4-2
Use props
shredzoo7
lvl.1
Flight distance : 67392 ft
Canada
Offline

Tom_A Posted at 4-1 23:12
I would expect the setting to be on the battery tab in Betaflight. I have never needed to change this, but I did have to change current here.

No that's for your actual quad Lipo only. I have that adjusted on all my rigs already. Very useful tab, but not for the goggles itself
2020-4-2
Use props
shredzoo7
lvl.1
Flight distance : 67392 ft
Canada
Offline

Xviews Posted at 4-2 05:30
4S
Goggle         14,6V
BATT        15,16V

ok, I get the same thing. Just wanted to make sure it wasn't a one off instance. I guess we just patiently wait for the next firmware. Not a huge deal I guess.
2020-4-2
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules