Overview:

• Released Date: 2020.05.14
• Aircraft Firmware: v01.00.0108
• Remote Controller Firmware: v01.00.0108
• Pilot App Android: v1.8.0R
• D-RTK 2 Mobile Station: v03.00.00.13
• Intelligent Battery Station: v01.05.06.04
• Intelligent Fight Battery: v01.02.05.22
• Zenmuse H20 / H20T: v01.00.01.08
• Zenmuse Z30: v01.00.06.10
• Zenmuse XT2: v01.00.03.50
• Zenmuse XT S: v01.00.00.09 (Coming soon)
• DJI X-Port: v01.01.01.00
• DJI Assistant 2 For Matrice: v2.0.11
• Firmware Upgrade Method:
  

• Aircraft / Remote Controller / D-RTK 2 Mobile Station: DJI Assistant 2
• The built-in DJI Pilot app: will be updated with the Remote Controller firmware
• Gimbal and Camera: microSD card
• Intelligent Battery Station: App (Connect the Battery Station to the remote controller and update it on the HMS page in the DJI Pilot app.)
  

What’s new？

• Adds support for Zenmuse XT S, Z30 and XT2. Note that XT2 can only be mounted on the 1st gimbal port.
• Supports the ability to select two video transmissions (FPV included) to display. Supports up to three video transmissions when using Advanced Dual Operator Mode.
• Updates the manuals in DJI Pilot app.
• Supports customizable button setting for the remote controller.
• Supports Update All function to update firmware (aircraft, remote controller and H20 / H20T) in app.
• Adds Primary Flight Display (PFD) in app, which can help users to see the aircraft information and 6 Directional Sensing and Positioning information more intuitively and easily.
• Adds Smart Pin & Track, allowing users to locate and track the mobile target, and share the location.
• Supports photo download from the camera for OSDK.
• Supports accurate meta-tagging for PSDK payloads.
• Adds support for Three-propeller Emergency Landing if the aircraft loses the capability of one motor during flight.
• Adds support for GEO Unlocking.
• Optimizes obstacle avoidance logic in the vertical direction of the aircraft.
• Optimizes control precision for AI Spot-check.
• Optimizes battery self-heating and protection strategy and battery balancing function.
• Fixed occasional issue: Breakpoints prevent the aircraft from continued flight in Flight Mission.
  

        
Notes:

• Make sure that the aircraft, remote controller, battery, D-RTK 2 mobile station (if used), payload (if used) are updated to the latest firmware version.
• Download the latest firmware from official website to microSD card to update the ZenmuseZ30, XT S, XT2 or H20 / H20T.
• It is required to use the DJI Pilot app built-in the remote controller, or download the app of V1.8.0R or later.
  

The 300RTK looks like an amazing enterprise drone

delete my post pls