Overview:

• Date: 2020.08.03
• Aircraft Firmware: v01.00.52.00
• Phantom 4 Pro V2.0 Remote Controller Firmware: v01.00.52.00
• Phantom 4 Pro+ V2.0 Remote Controller Firmware: v01.00.04.00
• DJI GO 4 App iOS: v4.3.37
• DJI GO 4 App Android: v4.3.36
  

What’s New?

• Optimized IQ parameter of camera to improve camera image quality.
• Increased the maximum transmission distance: 10 km (FCC), 6 km (CE/MIC/SRRC).
  

Notes:

• If the firmware update fails, restart the aircraft, remote controller, and DJI GO 4 app, and try updating again.
  

Phantom 4 users need also a new firmware to solve the horizon tilts snd the Idiot camera dance suffering from many devices, I already sent my device to repair and it was returned with the same problem.

Help needed: Gimbal roll motor issue or damage

https://forum.dji.com/forum.php? ... D559%26typeid%3D559

Thanks in Advance

there are several videos of the same problem with several devices that never had an accident ....

THII IS MINE : MIN 0:50
horizon tilts when i rolll the drone itself ,then , camera returns to its normal position but with a long delay

After start on the drone , camera does the check correctly , but it do a idiot dance  .... i tried all Firmwares , all configuration , Imu and compass calibration with no fixes for this issue

JetSam Posted at 8-2 21:46
Phantom 4 users need also a new firmware to solve the horizon tilts snd the Idiot camera dance suffering from many devices, I already sent my device to repair and it was returned with the same problem.

Help needed: Gimbal roll motor issue or damage

I was thinking of sending it but I have the same problem. Please DJI help on this thread..

Weecked Posted at 8-3 11:34
I was thinking of sending it but I have the same problem. Please DJI help on this thread..https://www.youtube.com/watch?v=bm6RXW9mHMs

Thanks for the support !!

i also have the same problem

Thanks a lot for this Firmware release DJI, but there are some problems that still persist, like the drifting and rotation of the V2.0. There are a few threads about this.

To everyone having the gimbal tilt issue, DJI has to repair it with an RMA.  I had a similar issue w/ the M2P out of the box but the RMA one fixed it before my warranty expired.

The P4PV2.0 for photography is incredibly underrated especially after all these camera and drone performance updates. : )

I know this because I fly commercially with happy clients when they call me every now and then for help.  M2Z is underrated as an inspection drone.  Why DJI is great?  Because they support their products and when something goes wrong, if you do everything else right it will land safely to you.

AntDX316 Posted at 8-5 20:01
To everyone having the gimbal tilt issue, DJI has to repair it with an RMA.  I had a similar issue w/ the M2P out of the box but the RMA one fixed it before my warranty expired.

RMA ??

JetSam Posted at 8-5 21:49
RMA ??

Return Manufacturer Authorization

You are better off just getting a Mavic Air 2.

better off just getting a Mavic Air 2 if you are a lucky guy ..... I will keep what I have left to eat ...

need this updated : )

JetSam Posted at 8-5 22:05
better off just getting a Mavic Air 2 if you are a lucky guy ..... I will keep what I have left to eat ...

If you sell all your other drones you can buy the MA2.

AntDX316 Posted at 8-7 03:56
If you sell all your other drones you can buy the MA2.

I know mate

Dirty Bird Posted at 8-7 11:45
The wandering horizon has been an issue for the P3, P4, & Mavic Pro.  Not sure if the original Mavic Air or Spark suffered as i never owned these models?   Never seen it quite as bad or abrupt as in the examples provided in this thread.   

Typically the horizon is off.  As you rotate the drone it will come to level, then tilt the other way as you continue yawing.  The cycle repeats if you continue rotating.  It is as though the IMU's sense of level is off.  I always felt the ultimate solution to this problem was the camera head having its own dedicated electronic level sensor.

Spark doesn't have the gimbal tilt issue or at least mine doesn't.  My M2P had it but only when sliding left which has been 100% fixed after an RMA.  Some people have no idea and even work for top news companies where you can see the massive gimbal tilt that they use for their presentation.

0:31 in this video.
https://www.cnn.com/videos/world/2020/08/05/beirut-explosion-lebanon-destruction-drone-video-lon-orig-bks.cnn

If people don't know what to look for they let it slide, slide way beyond warranty, all the way until they sell it or it crashes.  Some vehicles even have better features that can be unlocked with just coding and I'm not saying with Tesla that manufacturers just make new completely different models w/o anyone knowing it can be done through coding.  It's like one thing to have new features after retrofiting new things hardware wise but locking stuff out at just the software level Already built-in is pretty crazy that only few people know exist and how to do it.

Dirty Bird Posted at 8-7 11:45
The wandering horizon has been an issue for the P3, P4, & Mavic Pro.  Not sure if the original Mavic Air or Spark suffered as i never owned these models?   Never seen it quite as bad or abrupt as in the examples provided in this thread.   

Typically the horizon is off.  As you rotate the drone it will come to level, then tilt the other way as you continue yawing.  The cycle repeats if you continue rotating.  It is as though the IMU's sense of level is off.  I always felt the ultimate solution to this problem was the camera head having its own dedicated electronic level sensor.

hI cAPTAIN ! I think this about acelerometer in Camera Main board or something related , I never seen this fail in my Pnatom 3 SE , mAVIC pRO , oR MAvIC mINI

so, back to the actual topic.anybody updated?

TriptyX Posted at 8-12 13:52
so, back to the actual topic.anybody updated?

I updated when it became available last week; flew the next day with no problems. Will be flying tomorrow too.

TriptyX Posted at 8-12 13:52
so, back to the actual topic.anybody updated?

Always update for the sake of bug fixes.

thank you did the update, pretty uneventful this time

AntDX316 Posted at 8-12 20:07
Always update for the sake of bug fixes.

or for the sake of undocumented bugs

TriptyX Posted at 8-14 07:45
or for the sake of undocumented bugs

Sometimes you lose features, lost data, or it makes it catch fire as with nvidia cards but I always trust it's safe.  Luckily I didn't feature update when Microsoft deleted all the my documents from people.  Some updates, from what I've heard with Inspire 1 the range transmission has been a lot less after an update and it has never been the same since.

This did not improve my camera. All of my photos are now blurry. Reset to factory defaults. Re+updsted firmware via dji assistant. This started two updates ago, please fix. Auto focus, manual, etc. I can never get a clear photo anymore. Dealer even exchanged out for a brand new one. Same issue. Must be another firmware issue...feels like we are back in 2016

F.KOK Posted at 8-5 03:19
Thanks a lot for this Firmware release DJI, but there are some problems that still persist, like the drifting and rotation of the V2.0. There are a few threads about this.

I Still have this issue also

The camera quality has been degraded. Everything blurry. Troubleshooting with your support team, they agree images are blurry. Told me to send in for repair. They can’t repair firmware issues. Worked fine before the past two updates. New one has same issues

micron929rr Posted at 8-17 02:59
The camera quality has been degraded. Everything blurry. Troubleshooting with your support team, they agree images are blurry. Told me to send in for repair. They can’t repair firmware issues. Worked fine before the past two updates. New one has same issues

Enable mech. shutter and make sure you are on auto mode in daylight.

I just got mine back from DJI and have the same gimbal issue and now has gimbal overload warning.   Blow on the gimbal its over loaded.   Anyone have the version 1.2 I think before the iso 500 lock on log ?

I can't get my remote gl300k to pair or even recognize my phantom 4 pro plus v2 , I've tried to use dji assistant  but can't figure out how to convert the zip file to the bin format needed to manually or locally update the remote any Yelp is much appreciated

Erockk Posted at 8-19 00:41
I can't get my remote gl300k to pair or even recognize my phantom 4 pro plus v2 , I've tried to use dji assistant  but can't figure out how to convert the zip file to the bin format needed to manually or locally update the remote any Yelp is much appreciated

For Phantom 4 Advanced is the same firmware release? Or different?

F.KOK Posted at 8-5 03:19
Thanks a lot for this Firmware release DJI, but there are some problems that still persist, like the drifting and rotation of the V2.0. There are a few threads about this.

I use non-noise reduce blade and it come more stable, will not drift or rotate.

lliu0130 Posted at 9-17 06:34
I use non-noise reduce blade and it come more stable, will not drift or rotate.

use non-noise reduce blade and it come more stable, will not drift or rotate.

...are there more people who can confirm this.

F.KOK Posted at 9-17 22:56
use non-noise reduce blade and it come more stable, will not drift or rotate.

...are there more people who can confirm this.

I fly P4Pv2 around 2 years. Because I found this issue when I took photo 2 years ago, especially took photo at night. After did lots of testing. I found this issue caused by new noise reduce blade. Thus, I use non-noise blade which used by P4P version 1 and fixed this issue. I use non-noise reduce blade 2 years. My P4Pv2 has no encounter drift and rotate issue.

After this update I receive error : Navigation System error - redundancy state.
Can you help me? Now I tried to come back to the 01.00.500 but the error still remain and cannot take off

I has not fixed the horizon tilt error while turning

It does not appear to have fixed the horizon tilt when yawing.

There is now a horizon camera adjustment in the latest Go 4 App.

I will update soon

Follow me on Instagram