Hi

has anyone else noticed that on the smart controller the gimbal side to side movement does not work like on the phone app ?

If so, is there a solution.

Loving the Smart controller support, now I have finally got it to load. just wish I could sort the slow charging out. Takes forever, even on so called fast charge.

Is there a way to confirm that the controller is fast charging ? I do not get a slow charge warning.

The charge lights run across as normal then blink momentarily and then sweep again, is this right.

Any advice welcome.

Kevin

I never knew the touch screen gimbal pan never worked on the SC - thanks for sharing

A J Posted at 9-23 11:07
I never knew the touch screen gimbal pan never worked on the SC - thanks for sharing

This is a problem

Have you tried the original charger cube that came with the SC?

Niknik Posted at 9-23 17:21
This is a problem

Certainly detractor

A J Posted at 9-23 11:07
I never knew the touch screen gimbal pan never worked on the SC - thanks for sharing

Started working when I re tried, typical.

Visual Air Posted at 9-23 19:32
Have you tried the original charger cube that came with the SC?

Didnt realise I had it, but found it and all worked fine.

kevinh98 Posted at 9-24 00:41
Started working when I re tried, typical.

Cool - thats a positive then!

kevinh98 Posted at 9-24 00:42
Didnt realise I had it, but found it and all worked fine.

So is it working or not with the Smart Controller?

Niknik Posted at 9-24 04:43
So is it working or not with the Smart Controller?

... sure, of course! It is..

frankymusik Posted at 9-24 07:19
... sure, of course! It is..

Nice to hear it And nicer to do it

So does Facebook live now work with the MA2 or just combo of MA2 and smart controller?

kevinh98 Posted at 9-24 00:41
Started working when I re tried, typical.

Now I have noticed that the telemetry for the amount of space on SD card is not on the SC display.

I can live with that but wonder why not.

Billynj Posted at 9-24 15:31
So does Facebook live now work with the MA2 or just combo of MA2 and smart controller?

Not sure if that is the case, never used it,

The gimbal pan is not working again, not sure why.  Also sd card telemetry not on this version.

kevinh98 Posted at 9-26 14:01
The gimbal pan is not working again, not sure why.  Also sd card telemetry not on this version.

The SC has the version 1.1.6 and not 1.1.9 thats why

Niknik Posted at 9-26 15:05
The SC has the version 1.1.6 and not 1.1.9 thats why

How come it worked a couple of times on the SC before.
Incidently, this function has been there from day one anyway it was not an update.The screen graduations and telemetry show up, but it does not move in any direction from the touch screen.
The second time I started the SC it all worked fine.

It does explain the sd card telemetry.

I thought the 5 D button was supposed to move the gimbal and change focus. I see the grid lines for the gimbal but it doesn’t move. Nor does it change the focus

I thought the 5 D button was supposed to move the gimbal and change focus. I see the grid lines for the gimbal but it doesn’t move. Nor does it change the focus

when fast charging the lights will blink across faster. when normal slower charging the lights blink at a slower rate