I need this mount to lower the CG.

Please sell the ability for me to attach it to a slider.  The slider + the DJI RS2 not only brings the ability to have aim but the ability to aim assist w/ the Raveneye which can make for a better tracking shot than w/o at times.  I'm looking everywhere online on how to do this but cannot find it.

https://www.heliguy.com/rs-2-vehicle-expansion-kit-p6984

FVP Posted at 12-18 03:28
https://www.heliguy.com/rs-2-vehicle-expansion-kit-p6984

it doesn't work

I need this mount method so bad so I can attach it to the slider w/o being super top heavy and tall.  Can DJI please sell this mount instead of it being custom SDKed?

I have it and it work very well.

FVP Posted at 12-22 05:09
I have it and it work very well.

show real-life pictures

FVP Posted at 12-23 02:58

where do you hook up the battery?

let me know where I can get that item..

You need this cable : https://www.ebay.co.uk/itm/Coiled-Power-Cable-6-Pin-Male-Right-Angle-D-tap-P-tap-for-DJI-Focus-Motor-/124160220097

You plug lemo in RS2 short mount and voila !

But if you purchase the expansion kit you have a battery in the kit.

FVP Posted at 12-23 05:17
But if you purchase the expansion kit you have a battery in the kit.

Lead me to get everything I need to make it happen..  I'm not even sure what mount is that?  Where do you mount the battery?  How do they hook up together?

How is this not a standard by DJI to sell this way to put it on a Slider?   This makes it where you don't have to buy an Arc or what other competitors are selling to get movement on the Slider.  I assume there is a patent and people need to develop their own private workarounds?

How do I get that thing that the standard long battery is supposed to be and what is it?
Where does the other side of the wire go to and what is it connected to?  Why do we need it?

This is my setup now.

The support mount you see on my photo is a SLED that I use with my steady cam arm. The expansion short mount is powered by V-lock battery 12v (Cable 6 pin with Dtap plug you seen in the link I gave you)

But like I said previously, you have everything in expansion kit to mount and powering the RS2 on your slider. I needed the 6 pin/d-tape cable to be able to use RS2 on my SLED (with short mount from expansion kit)

FVP Posted at 12-23 05:17
But if you purchase the expansion kit you have a battery in the kit.

there comes no battery with the expansion kit!

FVP Posted at 12-24 07:21
The support mount you see on my photo is a SLED that I use with my steady cam arm. The expansion short mount is powered by V-lock battery 12v (Cable 6 pin with Dtap plug you seen in the link I gave you)

But like I said previously, you have everything in expansion kit to mount and powering the RS2 on your slider. I needed the 6 pin/d-tape cable to be able to use RS2 on my SLED (with short mount from expansion kit)

So I need a separate battery to power it that isn't from DJI?

Where do I get that expansion base system that replaces the standard DJI RS2 battery?

oh s*, is this it?? $499?

https://store.dji.com/product/ronin-expansion-base-kit

Can I just buy the piece that makes the CG lower and nothing else?

Yes this kit is the good one.

No the short mount is not available separately.

To powering the RS2 you need a V-lock battery with extra D-tap plug and the 6 pin/D-tape cable that you will plug on RS2 short mount.

https://tilta.com/shop/power-supply-base-plate-for-rs-2/

@Indio, good news

Indio Posted at 12-25 05:10
https://tilta.com/shop/power-supply-base-plate-for-rs-2/

What cable do I need to insert in here?

It comes w/ the cable.  I've ordered all the stuff and see how it will go.  I've got a jib coming too!  Being able to Raveneye and control w/ the Smartphone should make it interesting.

I have a big jib and the cables from expansion kit are long. Hope your cable will be enough long.

FVP Posted at 12-26 10:38
I have a big jib and the cables from expansion kit are long. Hope your cable will be enough long.

They said the cable is 157".

157” is too short for my Jib.

FVP Posted at 12-27 03:38
157” is too short for my Jib.

How long is your jib? 13' one direction is super long.  I'm attaching the battery to the center of the tripod.

7 meters so 157” is too short.

FVP Posted at 12-27 09:09
7 meters so 157” is too short.

What kind of jib are you using?

I have a microphone stand that goes 8' and it's super tall as s*.

Modified Proaim 21’

FVP Posted at 12-27 14:24
Modified Proaim 21’

show some of that work