Please select Into the mobile phone version | Continue to access the computer ver.
New Mavic Air 2 Firmware Released (12/28/2020)
1234Next >
20192 123 2020-12-27
Uploading and Loding Picture ...(0/1)
o(^-^)o
DJI Support
Administrator
Flight distance : 2408 ft
Hong Kong
Offline

Overview:
  • Date: 2020.12.28
  • Aircraft Firmware: v01.00.0511
  • Remote Controller: v02.00.1200
  • DJI Fly App iOS: v1.2.2
  • DJI Fly App Android: v1.2.2

What’s New?
  • Added cruise control for Free mode in Hyperlapse (requires DJI Fly v1.2.2 or later for iOS version. Support for Android version will be added later). Exercise caution when using cruise control.
  • Optimized RTH. If the aircraft is at a distance of 5 m to 50 m from the Home Point when RTH is initiated, the aircraft adjusts its orientation and flies to the Home Point at the current altitude.

Notes:
  • If the update fails, restart aircraft, remote controller, and DJI Fly or DJI Assistant 2 for Mavic, and retry.
  • The DJI Fly v1.2.2 for Android version needs to be downloaded from dji.com.



2020-12-27
Use props
VanzPix
Captain
Flight distance : 229672 ft
France
Offline

Merci
2020-12-27
Use props
PAYBACK
Second Officer
Flight distance : 683885 ft
South Africa
Offline

Thank you. Cruise control now that will be a handy feature.
2020-12-28
Use props
KnNLmS
Captain
Flight distance : 119967 ft
  • >>>
Turkey
Offline

Nice shot, thanks.
2020-12-28
Use props
isdoo
lvl.3
Flight distance : 2251119 ft
United Kingdom
Offline

Shame not for Android yet
2020-12-28
Use props
djiuser_BSCVq4mKjDAL
lvl.3
Flight distance : 2417461 ft
United Kingdom
Offline

Bought smart controller 2 months ago fly app ver 1.1.6 now were on 1.2.2 so prob 4 updates and dji says 1.2.0 doesnt work with the controller, so consequentially i dont get the latest firmware and safety features so not happy. Dji support just say there forwarding to the development team so i guess thats it.
Also as a  side note , how does this affect my warranty if anything goes wrong without safety firmwares being relected  ?
2020-12-28
Use props
Niknik
Captain
Flight distance : 1595640 ft
  • >>>
Greece
Offline

I installed it. I made three batteries flight no problem at all.
Tested RTH in less than 6meters it returns to home now but in the height that it is.
Cruise control in hyperlapse is what exactly? It is the same like before.

Android user DJI FLY 1.2.2
2020-12-28
Use props
alex_alb
Second Officer
Flight distance : 260735 ft
Portugal
Offline

Niknik Posted at 12-28 02:31
I installed it. I made three batteries flight no problem at all.
Tested RTH in less than 6meters it returns to home now but in the height that it is.
Cruise control in hyperlapse is what exactly? It is the same like before.

Not for Android!

Added cruise control for Free mode in Hyperlapse (requires DJI Fly v1.2.2 or later for iOS version. Support for Android version will be added later). Exercise caution when using cruise control.
2020-12-28
Use props
alex_alb
Second Officer
Flight distance : 260735 ft
Portugal
Offline

As last time it was a big mess ... this time I will wait to see how it works. And unfortunately DJI didn't think about Android users in the same way that it thought about IOS.
It is a pity that it is so.
They should have waited a few more days and launched for both!
2020-12-28
Use props
DarMcD
lvl.4
Flight distance : 1479610 ft
Ireland
Offline

Any chance we could get cruise control for normal flight as well. Would be really handy for some nice cinematic shots
2020-12-28
Use props
wildlifemoments
lvl.3
Flight distance : 927277 ft
Italy
Offline

the app for android is not in playstore yet but in dji download https://www.dji.com/mavic-air-2/downloads
2020-12-28
Use props
wildlifemoments
lvl.3
Flight distance : 927277 ft
Italy
Offline

alex_alb Posted at 12-28 02:45
As last time it was a big mess ... this time I will wait to see how it works. And unfortunately DJI didn't think about Android users in the same way that it thought about IOS.
It is a pity that it is so.
They should have waited a few more days and launched for both!

me too, I'll wait, but here you can find the android version https://www.dji.com/mavic-air-2/downloads
2020-12-28
Use props
MickeKling
Second Officer
Flight distance : 3144075 ft
  • >>>
Sweden
Offline

djiuser_BSCVq4mKjDAL Posted at 12-28 02:10
Bought smart controller 2 months ago fly app ver 1.1.6 now were on 1.2.2 so prob 4 updates and dji says 1.2.0 doesnt work with the controller, so consequentially i dont get the latest firmware and safety features so not happy. Dji support just say there forwarding to the development team so i guess thats it.
Also as a  side note , how does this affect my warranty if anything goes wrong without safety firmwares being relected  ?

Same here, it’s looks like it was a wast of money buying the SC för Mavic Air 2 :-(
2020-12-28
Use props
Learts Drones
lvl.3
Flight distance : 153182 ft

Brazil
Offline

What does this cruise control do?
2020-12-28
Use props
djiuser_BSCVq4mKjDAL
lvl.3
Flight distance : 2417461 ft
United Kingdom
Offline

MickeKling Posted at 12-28 04:40
Same here, it’s looks like it was a wast of money buying the SC för Mavic Air 2 :-(

Yeah totally agree sent it back after a month loss of signal and then wouldnt connect to assistant 2 for mavic on pc. Sent me  a refurbed one so complained so got  a new one. And now cant upgrade it as you say a waste of money and cant use properly with added features. Not impressed at all..
2020-12-28
Use props
Learts Drones
lvl.3
Flight distance : 153182 ft

Brazil
Offline

I don't even use the hyperlapse. this function was better in normal mode.
2020-12-28
Use props
VanzPix
Captain
Flight distance : 229672 ft
France
Offline

isdoo Posted at 12-28 00:52
Shame not for Android yet

I downloaded the latest version of Android fly dji from the DJI site and everything went well the firmware was also updated
2020-12-28
Use props
Montfrooij
Captain
Flight distance : 2560453 ft
  • >>>
Netherlands
Offline

Thanks for the info!
2020-12-28
Use props
MattCaz
lvl.4
Flight distance : 251358 ft
  • >>>
United States
Offline

MickeKling Posted at 12-28 04:40
Same here, it’s looks like it was a wast of money buying the SC för Mavic Air 2 :-(

I bought the SC 2 weeks ago.. you can sideload Fly 1.2.2 and if you install the android SDK, from what I've read it installs the 32 bit version for the 32bit SC.  People in the other threads have had no issues at all running 1.2.2 on the SC.

I just sideloaded it on mine and we'll see how it behaves.  Just went to Lightning browser, to dji.com/mobile/downloads and selected the dji fly apk. downloaded, went to file mgr and installed. ran app, sync'd to MA2. charging batteries now to test it out.

Do so at your own peril but like I said.. I'm not the first one to load 1.2.2 on the SC for the MA2.
Here's the thread where it's be done already, scroll toward the bottom:  https://forum.dji.com/forum.php? ... D568%26typeid%3D568

2020-12-28
Use props
djiuser_BSCVq4mKjDAL
lvl.3
Flight distance : 2417461 ft
United Kingdom
Offline

MattCaz Posted at 12-28 07:33
I bought the SC 2 weeks ago.. you can sideload Fly 1.2.2 and if you install the android SDK, from what I've read it installs the 32 bit version for the 32bit SC.  People in the other threads have had no issues at all running 1.2.2 on the SC.

I just sideloaded it on mine and we'll see how it behaves.  Just went to Lightning browser, to dji.com/mobile/downloads and selected the dji fly apk. downloaded, went to file mgr and installed. ran app, sync'd to MA2. charging batteries now to test it out.

Thanks i also side loaded it when i first got the controller  first flight after lost connection twice so deleted it and sent controller in couldnt trust it tbh. If you go o. DJI website and downloads find the fly app and it states 1.1.6 is the the one to use anything later is not compatible with S/C thats poss why had my disconnections. But report how it flys and might revisit it.
2020-12-28
Use props
WebParrot
Captain
Flight distance : 23625 ft
  • >>>
United States
Offline

Gee thanks for ignoring the new Smart Controller (Android).... Sounds like Crystal Sky support all over again.
2020-12-28
Use props
mafozi
Second Officer
Flight distance : 2590108 ft
Bulgaria
Offline

I've had 1.2.2 on Android for a few days now, but I got it from the Huawei store because I have such a phone.
So people with Huawei, I guess, check there as well and can update it.
2020-12-28
Use props
RobZilla
Captain
Flight distance : 1057844 ft
  • >>>
United States
Online

Just updated the FW this morning... will be doing some test flights later once the weather warms up!
2020-12-28
Use props
MattCaz
lvl.4
Flight distance : 251358 ft
  • >>>
United States
Offline

I updated the firmware and took the smart controller running 1.2.2 out for a spin.  Drone performed well in initial tests but the drone attitude/orientation indicator (on the little map) still doesn't show correctly but if you tap on the map it does show it flying right over the street I was on and pointed in the right direction.

After this little test I decided to remove the update on the SC and take it back to 1.1.6 and wait for the official update from DJI for the SC.
2020-12-28
Use props
KlooGee
Captain
Flight distance : 16641309 ft
  • >>>
United States
Offline

WebParrot Posted at 12-28 08:14
Gee thanks for ignoring the new Smart Controller (Android).... Sounds like Crystal Sky support all over again.

There is nothing stopping you from installing it on the Smart Controller.  
2020-12-28
Use props
djiuser_BSCVq4mKjDAL
lvl.3
Flight distance : 2417461 ft
United Kingdom
Offline

MattCaz Posted at 12-28 09:23
I updated the firmware and took the smart controller running 1.2.2 out for a spin.  Drone performed well in initial tests but the drone attitude/orientation indicator (on the little map) still doesn't show correctly but if you tap on the map it does show it flying right over the street I was on and pointed in the right direction.

After this little test I decided to remove the update on the SC and take it back to 1.1.6 and wait for the official update from DJI for the SC.

Good idea as it could invalidate your warranty, thats why ill wait but who knows how long it will take, frustrating tho as we miss out on any improvements.
2020-12-28
Use props
Fantomgep
lvl.4
Flight distance : 30594 ft
  • >>>
Hungary
Offline

djiuser_BSCVq4mKjDAL Posted at 12-28 02:10
Bought smart controller 2 months ago fly app ver 1.1.6 now were on 1.2.2 so prob 4 updates and dji says 1.2.0 doesnt work with the controller, so consequentially i dont get the latest firmware and safety features so not happy. Dji support just say there forwarding to the development team so i guess thats it.
Also as a  side note , how does this affect my warranty if anything goes wrong without safety firmwares being relected  ?
You can download the 1.2.2 apk android  version from the dji site for your smart controller.
2020-12-28
Use props
MattCaz
lvl.4
Flight distance : 251358 ft
  • >>>
United States
Offline

Fantomgep Posted at 12-28 09:47
You can download the 1.2.2 apk android  version from the dji site for your smart controller.

Problem is.. if you have sideloaded 1.2.2 and your MA2 bites the dust, will DJI cover you if you have Refresh on your MA2?  I doubt it because you were using "Unsupported" software to control it. You know thats what they will say.
2020-12-28
Use props
Pappy3
First Officer
Flight distance : 2820469 ft
United States
Offline

For Android users there is a third bullet from the firmware update notice: "he DJI Fly v1.2.2 for Android version needs to be downloaded from dji.com". Why would DJI say you "need" to download from the DJI site, instead of "Requires Fly v1.2.2"? Won't the 1.2.2 eventually be available on Google Play?
2020-12-28
Use props
MattCaz
lvl.4
Flight distance : 251358 ft
  • >>>
United States
Offline

Pappy3 Posted at 12-28 10:15
For Android users there is a third bullet from the firmware update notice: "he DJI Fly v1.2.2 for Android version needs to be downloaded from dji.com". Why would DJI say you "need" to download from the DJI site, instead of "Requires Fly v1.2.2"? Won't the 1.2.2 eventually be available on Google Play?

Open your browser on your tablet and go to : dji.com/mobile/downloads/ and you can download and install the android 1.2.2 apk.  I just did it on my Asus tablet. Zero Problems. haven't flown with it yet though.
2020-12-28
Use props
MickeKling
Second Officer
Flight distance : 3144075 ft
  • >>>
Sweden
Offline

MattCaz Posted at 12-28 07:33
I bought the SC 2 weeks ago.. you can sideload Fly 1.2.2 and if you install the android SDK, from what I've read it installs the 32 bit version for the 32bit SC.  People in the other threads have had no issues at all running 1.2.2 on the SC.

I just sideloaded it on mine and we'll see how it behaves.  Just went to Lightning browser, to dji.com/mobile/downloads and selected the dji fly apk. downloaded, went to file mgr and installed. ran app, sync'd to MA2. charging batteries now to test it out.

There must be some reason not to release an official SC-version of 1.2.2. I’ll use the stock controller and my iPhone until it’s released. I just wish DJI would prioritize their own hardware little higher, even more now when they released a MA2 package including the SC.
2020-12-28
Use props
Pappy3
First Officer
Flight distance : 2820469 ft
United States
Offline

MattCaz Posted at 12-28 11:01
Open your browser on your tablet and go to : dji.com/mobile/downloads/ and you can download and install the android 1.2.2 apk.  I just did it on my Asus tablet. Zero Problems. haven't flown with it yet though.

My comment wasn't about how to download the apk off of the DJI download page (I did that a couple of days ago and installed) but more on why DJI would direct users to their download site ("needs to be downloaded from dji.com") rather than saying something like "Requires DJI Fly v1.2.2 or later" as in this screenshot from FW update 1101.
Screenshot_20201106-223341.jpg
2020-12-28
Use props
MattCaz
lvl.4
Flight distance : 251358 ft
  • >>>
United States
Offline

Pappy3 Posted at 12-28 13:48
My comment wasn't about how to download the apk off of the DJI download page (I did that a couple of days ago and installed) but more on why DJI would direct users to their download site ("needs to be downloaded from dji.com") rather than saying something like "Requires DJI Fly v1.2.2 or later" as in this screenshot from FW update 1101.
[view_image]

Was just trying to be helpful, not insulting
2020-12-28
Use props
Learts Drones
lvl.3
Flight distance : 153182 ft

Brazil
Offline

waypoints that is good nothing!
2020-12-28
Use props
DJI Stephen
DJI team
Offline


Hello there VanzPix. Thank you for the reply and you are very much welcome. Have a safe and a happy flying always.
2020-12-28
Use props
fans0661bc91
lvl.3
Flight distance : 210095 ft
United States
Offline

isdoo Posted at 12-28 00:52
Shame not for Android yet

You can download fly app1.2.2 for android from dji downloads no problem works with my s10+
2020-12-29
Use props
MickeKling
Second Officer
Flight distance : 3144075 ft
  • >>>
Sweden
Offline

The official SC firmware update is now live (incl. Fly App 1.2.2), I’ve just updated my SC :-)
2020-12-29
Use props
Eckonism
lvl.1
Flight distance : 214265 ft
Germany
Offline

Some users have reported disconnections at 200m distance, including completely crazy behavior with 1.2.2 which even led to a crash with damage. Has anyone been able to verify a normal flight with 1.2.2 and the standard controller on a longer distance?!?
2020-12-29
Use props
DowntownRDB
Captain
Flight distance : 1722 ft
  • >>>
United States
Online

MickeKling Posted at 12-29 03:58
The official SC firmware update is now live (incl. Fly App 1.2.2), I’ve just updated my SC :-)

Nice, thanks for the heads up.
2020-12-29
Use props
djiuser_NMEGPFEC1Ic8
lvl.4
Flight distance : 9616 ft
United States
Offline

Pappy3 Posted at 12-28 10:15
For Android users there is a third bullet from the firmware update notice: "he DJI Fly v1.2.2 for Android version needs to be downloaded from dji.com". Why would DJI say you "need" to download from the DJI site, instead of "Requires Fly v1.2.2"? Won't the 1.2.2 eventually be available on Google Play?

The version at the Android Play Store is the previous version so won't take advantage of the new features. I went direct to DJI and got the latest version 1.2.2 there. That along with the latest Firmware release fixes the DNG issue, the color streak at the top left, and a few other tweaks.
For those who complained about needing to do the IMU calibration repeatedly.....that is because you may be using a "hand landing" and turning it upside down to stall the motors. It sees the IMU error and than requires a recalibration. Normal landing won't cause that to happen.
2020-12-29
Use props
1234Next >
Advanced
You need to log in before you can reply Login | Register now

Credit Rules