Hi Guys,

I'm trying to update my DJI phantom3 pro firmware V.1.11.20.
I have copied the bin file in root level of SD card.
when updating after few mins its giving my long beep noise and the led light stays Red.

i checked the Text file in my sd card and the error message says " Update failed Remo-Con Disconnect"

Any help?

Thanks

Hi, Kamy. Thanks for reaching out! Our apologies for the difficulties you're encountering. We recommend formatting again the SD card via the DJI GO app before moving the .bin file. Kindly ensure that it only contains a single file, which is the firmware as it may cause failure.

DJI Gamora Posted at 1-23 23:00
Hi, Kamy. Thanks for reaching out! Our apologies for the difficulties you're encountering. We recommend formatting again the SD card via the DJI GO app before moving the .bin file. Kindly ensure that it only contains a single file, which is the firmware as it may cause failure.

https://youtu.be/EPuhdZ4l18Q

Hi

I have formatted the SD card using the DJI Go app.

and only one single .bin file located.

I'm still getting the Long beep and solid red on gimble.

any alternate troubleshooting?

Regards,
Kam

Kamy Posted at 1-24 05:24
Hi

I have formatted the SD card using the DJI Go app.

We suggest trying out different micro-SD card to see if that helps. If the problem continues, please upload the RESULT_AB.txt and the LOG_AB.txt. The LOG_AB.txt is hidden and can be found under \MISC\LOG\, you need to show the hidden file in the system settings of your desktop. Please upload it either DropBox or GoogleDrive.

Hi,
Result Log:
Result: Success.

========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:01:36 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:06:18 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:15 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2021.01.23 10:47:30 =====================
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2021.01.23 10:49:58 =====================
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:01:40 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2021.01.23 17:30:27 =====================
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2021.01.23 17:37:38 =====================
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2021.01.23 17:40:47 =====================
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2021.01.24 09:16:18 =====================
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2021.01.24 09:56:22 =====================
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2021.01.24 10:39:20 =====================
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2021.01.25 12:31:16 =====================
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.10.0090.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.


LOG_AB

[00012228][01 00] Firmware upgrade finished successfully.
[00012339]Done.

[00012371]Packet [C:\P3X_FW_V01.03.0020.bin] resumed, card sn [0x70ce4456].
[00012413]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012480]Version checking[2]...
[00012537][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012595][03 06][00] v2.1.6.18 -> v2.2.6.19 need upgrade.
[00012639][04 00][00] v1.38.0.0 -> v1.40.0.0 need upgrade.
[00012688][09 00][00] v1.7.0.3 -> v1.7.0.3
[00012775][11 00][00] v1.6.1.0 -> v1.7.0.0 need upgrade.
[00012850][12 00][00] v1.8.0.0 -> v1.8.0.0
[00012928][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013004][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013094][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013211][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013323][17 00][00] v1.1.1.2 -> v1.1.1.7 need upgrade.
[00013429][17 01][00] v1.0.2.4 -> v1.0.2.7 need upgrade.
[00013489][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013523][01 00][05] v1.23.3419 -> v1.23.3419
[00013557][01 01][00] v1.6.2736 -> v1.23.3419 need upgrade
[00013605][08 00][00] v0.11.0.4 -> v0.12.0.4 need upgrade.
[00013638]Done.

[00013671]Firmware upgrading[2]...
[00013815][01 01] Firmware upgrade start...
[00044078][01 01] Firmware upgrade finished successfully.
[00044954][08 00] Firmware upgrade start...
[00577555][08 00] Firmware upgrade finished successfully.
[00577613][17 00] Firmware upgrade start...
[00672144][17 00] Firmware upgrade finished successfully.
[00672190][17 01] Firmware upgrade start...
[00732330][17 01] Firmware upgrade finished successfully.
[00732375][11 00] Firmware upgrade start...
[00784924][11 00] Firmware upgrade finished successfully.
[00785138][03 06] Firmware upgrade start...
[01100624][03 06] Firmware upgrade finished successfully.
[01100686][04 00] Firmware upgrade start...
[01158274][04 00] Firmware upgrade finished successfully.
[01158308]Done.

[01158348]Version checking[3]...
[01158422][03 05][00] v34.2.0.9 -> v34.2.0.9
[01158501][03 06][05] v2.2.6.19 -> v2.2.6.19
[01158539][04 00][05] v1.40.0.0 -> v1.40.0.0
[01158677][09 00][00] v1.7.0.3 -> v1.7.0.3
[01158958][11 00][05] v1.7.0.0 -> v1.7.0.0
[01159052][12 00][00] v1.8.0.0 -> v1.8.0.0
[01159127][12 01][00] v1.8.0.0 -> v1.8.0.0
[01159207][12 02][00] v1.8.0.0 -> v1.8.0.0
[01159321][12 03][00] v1.8.0.0 -> v1.8.0.0
[01159449][15 00][00] v1.1.2.0 -> v1.1.2.0
[01159526][17 00][05] v1.1.1.7 -> v1.1.1.7
[01159655][17 01][05] v1.0.2.7 -> v1.0.2.7
[01159697][19 00][00] v1.0.8.96 -> v1.0.8.96
[01159732][01 00][05] v1.23.3419 -> v1.23.3419
[01159763][01 01][05] v1.23.3419 -> v1.23.3419
[01159822][08 00][05] v0.12.0.4 -> v0.12.0.4
[01159853]Packet upgrade finish successfully.



[00015167]========== remo-con disconnect. boot(15) ============
[00015200]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x70ce4456].
[00015233]Packet upgrade start...

[00015272]Packet checking...
[00015310]Packet vlink 01.11.0020 <-> 01.11.0020.
[00015347]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00015382]Done.

[00015416]Version checking[1]...
[00015511][03 06][00] v2.2.6.19 -> v2.4.20.50 need upgrade.
[00015591][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015641][04 00][00] v1.40.0.0 -> v1.48.0.0 need upgrade.
[00015752][11 00][00] v1.7.0.0 -> v1.8.0.0 need upgrade.
[00015871][11 01][00] v1.7.0.0 -> v2.0.0.33 need upgrade.
[00015961][12 00][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00016036][12 01][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00016126][12 02][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00016228][12 03][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00028769][15 00][00] device not detected.
[00028856][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028976][17 01][00] v1.0.2.7 -> v1.0.2.7
[00029027][19 00][00] v1.0.8.96 -> v1.0.8.96
[00029069][01 00][00] v1.23.3419 -> v1.32.5432 need upgrade
[00029103][01 01][00] v1.23.3419 -> v1.32.5432 need upgrade
[00041643][08 00][00] device not detected.
[00041707][09 00][00] v1.7.0.3 -> v4.1.0.0 need upgrade.
[00041745]Done.

[00043779]Waiting for user confirm...
[00053899]Timeout, start upgrade automatically.

[00053971]Firmware upgrading[1]...
[00065813][01 00] Firmware upgrade start...
[00014733][01 00] Firmware upgrade finished successfully.
[00014776]Done.

[00014810]Packet [C:\P3X_FW_V01.11.0020.bin] resumed, card sn [0x70ce4456].
[00014853]Packet vlink 01.11.0020 <-> 01.11.0020.
[00014889]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00014933]Version checking[2]...
[00015003][03 06][00] v2.2.6.19 -> v2.4.20.50 need upgrade.
[00015086][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015127][04 00][00] v1.40.0.0 -> v1.48.0.0 need upgrade.
[00015242][11 00][00] v1.7.0.0 -> v1.8.0.0 need upgrade.
[00015363][11 01][00] v1.7.0.0 -> v2.0.0.33, firmware v1.7.0.0 not support.
[00015398][11 01][00] v1.7.0.0 -> v2.0.0.33
[00015498][12 00][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00015597][12 01][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00015698][12 02][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00015818][12 03][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00028353][15 00][00] device not detected.
[00028448][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028569][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028638][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028674][01 00][05] v1.32.5432 -> v1.32.5432
[00028709][01 01][00] v1.23.3419 -> v1.32.5432 need upgrade
[00041249][08 00][00] device not detected.
[00041300][09 00][00] v1.7.0.3 -> v4.1.0.0 need upgrade.
[00041336]Done.

[00041374]Firmware upgrading[2]...
[00041515][01 01] Firmware upgrade start...
[00071782][01 01] Firmware upgrade finished successfully.
[00071843][12 00] Firmware upgrade start...
[00136085][12 00] Firmware upgrade finished successfully.
[00136141][12 01] Firmware upgrade start...
[00204589][12 01] Firmware upgrade finished successfully.
[00204648][12 02] Firmware upgrade start...
[00266046][12 02] Firmware upgrade finished successfully.
[00266100][12 03] Firmware upgrade start...
[00327190][12 03] Firmware upgrade finished successfully.
[00327244][11 00] Firmware upgrade start...
[00374258][11 00] Firmware upgrade finished successfully.
[00374534][03 06] Firmware upgrade start...
[00762803][03 06] Firmware upgrade finished successfully.
[00762873][09 00] Firmware upgrade start...
[00821215][09 00] Firmware upgrade finished successfully.
[00821283][04 00] Firmware upgrade start...
[00879495][04 00] Firmware upgrade finished successfully.
[00879535]Done.

[00879573]Version checking[3]...
[00879645][03 06][05] v2.4.20.50 -> v2.4.20.50
[00879717][03 05][00] v34.2.0.9 -> v34.2.0.9
[00879797][04 00][05] v1.48.0.0 -> v1.48.0.0
[00879917][11 00][05] v1.8.0.0 -> v1.8.0.0
[00880045][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00880082][11 01][00] v1.8.0.0 -> v2.0.0.33
[00880196][12 00][05] v1.12.0.0 -> v1.12.0.0
[00880297][12 01][05] v1.12.0.0 -> v1.12.0.0
[00880397][12 02][05] v1.12.0.0 -> v1.12.0.0
[00880486][12 03][05] v1.12.0.0 -> v1.12.0.0
[00893027][15 00][00] device not detected.
[00893107][17 00][00] v1.1.1.7 -> v1.1.1.7
[00893232][17 01][00] v1.0.2.7 -> v1.0.2.7
[00893282][19 00][00] v1.0.8.96 -> v1.0.8.96
[00893327][01 00][05] v1.32.5432 -> v1.32.5432
[00893363][01 01][05] v1.32.5432 -> v1.32.5432
[00905905][08 00][00] device not detected.
[00905964][09 00][05] v4.1.0.0 -> v4.1.0.0
[00906006]Packet upgrade failed at version checking.



[00014851]========== remo-con disconnect. boot(15) ============
[00014887]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x70ce4456].
[00014920]Packet upgrade start...

[00014960]Packet checking...
[00015000]Packet vlink 01.11.0020 <-> 01.11.0020.
[00015038]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00015071]Done.

[00015107]Version checking[1]...
[00015172][03 06][00] v2.4.20.50 -> v2.4.20.50
[00015232][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015272][04 00][00] v1.48.0.0 -> v1.48.0.0
[00015373][11 00][00] v1.8.0.0 -> v1.8.0.0
[00015472][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00015513][11 01][00] v1.8.0.0 -> v2.0.0.33
[00015713][12 00][00] v1.12.0.0 -> v1.12.0.0
[00015787][12 01][00] v1.12.0.0 -> v1.12.0.0
[00015894][12 02][00] v1.12.0.0 -> v1.12.0.0
[00015967][12 03][00] v1.12.0.0 -> v1.12.0.0
[00028511][15 00][00] device not detected.
[00028577][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028679][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028743][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028779][01 00][00] v1.32.5432 -> v1.32.5432
[00028815][01 01][00] v1.32.5432 -> v1.32.5432
[00041358][08 00][00] device not detected.
[00041424][09 00][00] v4.1.0.0 -> v4.1.0.0
[00041460]Packet upgrade failed at version checking.



[00012491]========== remo-con disconnect. boot(15) ============
[00012525]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x70ce4456].
[00012560]Packet upgrade start...

[00012604]Packet checking...
[00012642]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012678]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012714]Done.

[00012750]Version checking[1]...
[00012826][03 06][00] v2.4.20.50 -> v2.4.20.50
[00012907][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012958][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013060][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013180][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013216][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013325][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013431][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013509][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013600][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026138][15 00][00] device not detected.
[00026209][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026350][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026412][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026455][01 00][00] v1.32.5432 -> v1.32.5432
[00026491][01 01][00] v1.32.5432 -> v1.32.5432
[00039027][08 00][00] device not detected.
[00039091][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039132]Packet upgrade failed at version checking.



[00014495]========== remo-con disconnect. boot(15) ============
[00014531]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x70ce4456].
[00014648]Packet upgrade start...

[00014690]Packet checking...
[00014730]Packet vlink 01.11.0020 <-> 01.11.0020.
[00014773]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00014806]Done.

[00014843]Version checking[1]...
[00014905][03 06][00] v2.4.20.50 -> v2.4.20.50
[00014980][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015027][04 00][00] v1.48.0.0 -> v1.48.0.0
[00015140][11 00][00] v1.8.0.0 -> v1.8.0.0
[00015240][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00015280][11 01][00] v1.8.0.0 -> v2.0.0.33
[00015354][12 00][00] v1.12.0.0 -> v1.12.0.0
[00015432][12 01][00] v1.12.0.0 -> v1.12.0.0
[00015509][12 02][00] v1.12.0.0 -> v1.12.0.0
[00015600][12 03][00] v1.12.0.0 -> v1.12.0.0
[00028140][15 00][00] device not detected.
[00028215][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028355][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028410][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028453][01 00][00] v1.32.5432 -> v1.32.5432
[00028488][01 01][00] v1.32.5432 -> v1.32.5432
[00041023][08 00][00] device not detected.
[00041091][09 00][00] v4.1.0.0 -> v4.1.0.0
[00041133]Packet upgrade failed at version checking.



[00012669]========== remo-con disconnect. boot(15) ============
[00012706]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x70ce4456].
[00012742]Packet upgrade start...

[00012787]Packet checking...
[00012827]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012867]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012902]Done.

[00012946]Version checking[1]...
[00013011][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013090][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013138][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013250][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013572][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013615][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013704][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013784][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013859][12 02][00] v1.12.0.0 -> v1.12.0.0
[00014044][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026582][15 00][00] device not detected.
[00026675][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026799][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026875][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026915][01 00][00] v1.32.5432 -> v1.32.5432
[00026958][01 01][00] v1.32.5432 -> v1.32.5432
[00039493][08 00][00] device not detected.
[00039558][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039596]Packet upgrade failed at version checking.



[00012525]========== remo-con disconnect. boot(15) ============
[00012561]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x70ce4456].
[00012604]Packet upgrade start...

[00012645]Packet checking...
[00012684]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012721]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012765]Done.

[00012802]Version checking[1]...
[00012895][03 06][00] v2.4.20.50 -> v2.4.20.50
[00012974][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013017][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013134][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013254][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013295][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013382][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013459][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013548][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013654][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026189][15 00][00] device not detected.
[00026300][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026419][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026475][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026512][01 00][00] v1.32.5432 -> v1.32.5432
[00026551][01 01][00] v1.32.5432 -> v1.32.5432
[00039086][08 00][00] device not detected.
[00039155][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039192]Packet upgrade failed at version checking.



[00012520]========== remo-con disconnect. boot(15) ============
[00012556]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x70ce4456].
[00012599]Packet upgrade start...

[00012643]Packet checking...
[00012681]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012797]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012836]Done.

[00012876]Version checking[1]...
[00012951][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013011][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013063][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013171][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013271][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013311][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013405][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013511][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013611][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013721][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026257][15 00][00] device not detected.
[00026337][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026446][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026502][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026538][01 00][00] v1.32.5432 -> v1.32.5432
[00026577][01 01][00] v1.32.5432 -> v1.32.5432
[00039126][08 00][00] device not detected.
[00039182][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039217]Packet upgrade failed at version checking.



[00096492]========== remo-con disconnect. boot(15) ============
[00096536]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x70ce4456].
[00096572]Packet upgrade start...

[00096618]Packet checking...
[00096660]Packet vlink 01.11.0020 <-> 01.11.0020.
[00096705]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00096746]Done.

[00096785]Version checking[1]...
[00096867][03 06][00] v2.4.20.50 -> v2.4.20.50
[00096948][03 05][00] v34.2.0.9 -> v34.2.0.9
[00096992][04 00][00] v1.48.0.0 -> v1.48.0.0
[00097134][11 00][00] v1.8.0.0 -> v1.8.0.0
[00097247][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00097287][11 01][00] v1.8.0.0 -> v2.0.0.33
[00097376][12 00][00] v1.12.0.0 -> v1.12.0.0
[00097455][12 01][00] v1.12.0.0 -> v1.12.0.0
[00097547][12 02][00] v1.12.0.0 -> v1.12.0.0
[00097636][12 03][00] v1.12.0.0 -> v1.12.0.0
[00110171][15 00][00] device not detected.
[00110257][17 00][00] v1.1.1.7 -> v1.1.1.7
[00110476][17 01][00] v1.0.2.7 -> v1.0.2.7
[00110532][19 00][00] v1.0.8.96 -> v1.0.8.96
[00110571][01 00][00] v1.32.5432 -> v1.32.5432
[00110609][01 01][00] v1.32.5432 -> v1.32.5432
[00123150][08 00][00] device not detected.
[00123213][09 00][00] v4.1.0.0 -> v4.1.0.0
[00123254]Packet upgrade failed at version checking.



[00014562]========== remo-con disconnect. boot(15) ============
[00014606]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x70ce4456].
[00014645]Packet upgrade start...

[00014688]Packet checking...
[00014730]Packet vlink 01.11.0020 <-> 01.11.0020.
[00014773]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00014811]Done.

[00014851]Version checking[1]...
[00014937][03 06][00] v2.4.20.50 -> v2.4.20.50
[00015016][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015070][04 00][00] v1.48.0.0 -> v1.48.0.0
[00015197][11 00][00] v1.8.0.0 -> v1.8.0.0
[00015355][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00015393][11 01][00] v1.8.0.0 -> v2.0.0.33
[00015516][12 00][00] v1.12.0.0 -> v1.12.0.0
[00015616][12 01][00] v1.12.0.0 -> v1.12.0.0
[00015704][12 02][00] v1.12.0.0 -> v1.12.0.0
[00015797][12 03][00] v1.12.0.0 -> v1.12.0.0
[00028340][15 00][00] device not detected.
[00028421][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028560][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028616][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028658][01 00][00] v1.32.5432 -> v1.32.5432
[00028697][01 01][00] v1.32.5432 -> v1.32.5432
[00041237][08 00][00] device not detected.
[00041298][09 00][00] v4.1.0.0 -> v4.1.0.0
[00041337]Packet upgrade failed at version checking.



[00378555]========== remo-con disconnect. boot(15) ============
[00378600]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x70ce4456].
[00378650]Packet upgrade start...

[00378698]Packet checking...
[00378739]Packet vlink 01.11.0020 <-> 01.11.0020.
[00378777]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00378823]Done.

[00378867]Version checking[1]...
[00379029][03 06][00] v2.4.20.50 -> v2.4.20.50
[00379107][03 05][00] v34.2.0.9 -> v34.2.0.9
[00379156][04 00][00] v1.48.0.0 -> v1.48.0.0
[00379287][11 00][00] v1.8.0.0 -> v1.8.0.0
[00379427][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00379475][11 01][00] v1.8.0.0 -> v2.0.0.33
[00379587][12 00][00] v1.12.0.0 -> v1.12.0.0
[00379696][12 01][00] v1.12.0.0 -> v1.12.0.0
[00379800][12 02][00] v1.12.0.0 -> v1.12.0.0
[00379895][12 03][00] v1.12.0.0 -> v1.12.0.0
[00392440][15 00][00] device not detected.
[00392531][17 00][00] v1.1.1.7 -> v1.1.1.7
[00392651][17 01][00] v1.0.2.7 -> v1.0.2.7
[00392704][19 00][00] v1.0.8.96 -> v1.0.8.96
[00392748][01 00][00] v1.32.5432 -> v1.32.5432
[00392788][01 01][00] v1.32.5432 -> v1.32.5432
[00405334][08 00][00] device not detected.
[00405405][09 00][00] v4.1.0.0 -> v4.1.0.0
[00405449]Packet upgrade failed at version checking.



[00016143]========== remo-con disconnect. boot(15) ============
[00016180]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x0a1b3b66].
[00016220]Packet upgrade start...

[00016269]Packet checking...
[00016310]Packet vlink 01.11.0020 <-> 01.11.0020.
[00016349]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00016388]Done.

[00016435]Version checking[1]...
[00016524][03 06][00] v2.4.20.50 -> v2.4.20.50
[00016617][03 05][00] v34.2.0.9 -> v34.2.0.9
[00016664][04 00][00] v1.48.0.0 -> v1.48.0.0
[00016781][11 00][00] v1.8.0.0 -> v1.8.0.0
[00016903][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00016944][11 01][00] v1.8.0.0 -> v2.0.0.33
[00019534][12 00][00] v1.12.0.0 -> v1.12.0.0
[00019631][12 01][00] v1.12.0.0 -> v1.12.0.0
[00019731][12 02][00] v1.12.0.0 -> v1.12.0.0
[00019830][12 03][00] v1.12.0.0 -> v1.12.0.0
[00032372][15 00][00] device not detected.
[00032466][17 00][00] v1.1.1.7 -> v1.1.1.7
[00032591][17 01][00] v1.0.2.7 -> v1.0.2.7
[00032657][19 00][00] v1.0.8.96 -> v1.0.8.96
[00032695][01 00][00] v1.32.5432 -> v1.32.5432
[00032829][01 01][00] v1.32.5432 -> v1.32.5432
[00045371][08 00][00] device not detected.
[00045437][09 00][00] v4.1.0.0 -> v4.1.0.0
[00045475]Packet upgrade failed at version checking.



[00012776]========== remo-con disconnect. boot(15) ============
[00012815]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x0a1b3b66].
[00012854]Packet upgrade start...

[00012902]Packet checking...
[00012942]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012996]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00013036]Done.

[00013077]Version checking[1]...
[00013164][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013248][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013293][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013426][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013545][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013592][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013702][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013812][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013888][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013993][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026533][15 00][00] device not detected.
[00026628][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026764][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026823][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026863][01 00][00] v1.32.5432 -> v1.32.5432
[00026902][01 01][00] v1.32.5432 -> v1.32.5432
[00039451][08 00][00] device not detected.
[00039504][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039546]Packet upgrade failed at version checking.



[00132782]========== 2021.01.23 10:47:30. boot(15) ============
[00132825]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x0a1b3b66].
[00132871]Packet upgrade start...

[00132914]Packet checking...
[00132959]Packet vlink 01.11.0020 <-> 01.11.0020.
[00132999]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00133045]Done.

[00133085]Version checking[1]...
[00133179][03 06][00] v2.4.20.50 -> v2.4.20.50
[00133279][03 05][00] v34.2.0.9 -> v34.2.0.9
[00133326][04 00][00] v1.48.0.0 -> v1.48.0.0
[00133543][11 00][00] v1.8.0.0 -> v1.8.0.0
[00133681][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00133728][11 01][00] v1.8.0.0 -> v2.0.0.33
[00133827][12 00][00] v1.12.0.0 -> v1.12.0.0
[00133933][12 01][00] v1.12.0.0 -> v1.12.0.0
[00134033][12 02][00] v1.12.0.0 -> v1.12.0.0
[00134133][12 03][00] v1.12.0.0 -> v1.12.0.0
[00146673][15 00][00] device not detected.
[00146763][17 00][00] v1.1.1.7 -> v1.1.1.7
[00146908][17 01][00] v1.0.2.7 -> v1.0.2.7
[00146974][19 00][00] v1.0.8.96 -> v1.0.8.96
[00147015][01 00][00] v1.32.5432 -> v1.32.5432
[00147061][01 01][00] v1.32.5432 -> v1.32.5432
[00159604][08 00][00] device not detected.
[00159675][09 00][00] v4.1.0.0 -> v4.1.0.0
[00159720]Packet upgrade failed at version checking.



[00012584]========== 2021.01.23 10:49:59. boot(15) ============
[00012636]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x70ce4456].
[00012676]Packet upgrade start...

[00012723]Packet checking...
[00012774]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012816]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012861]Done.

[00012903]Version checking[1]...
[00013007][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013108][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013157][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013285][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013409][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013461][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013558][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013651][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013729][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013832][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026374][15 00][00] device not detected.
[00026470][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026613][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026681][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026723][01 00][00] v1.32.5432 -> v1.32.5432
[00026767][01 01][00] v1.32.5432 -> v1.32.5432
[00039320][08 00][00] device not detected.
[00039383][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039430]Packet upgrade failed at version checking.



[00012600]========== remo-con disconnect. boot(15) ============
[00012645]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x70ce4456].
[00012690]Packet upgrade start...

[00012746]Packet checking...
[00012792]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012838]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012882]Done.

[00012934]Version checking[1]...
[00025478][03 06][00] device not detected.
[00038022][03 05][00] device not detected.
[00038084][04 00][00] v1.48.0.0 -> v1.48.0.0
[00050635][11 00][00] device not detected.
[00063181][11 01][00] device not detected.
[00075729][12 00][00] device not detected.
[00088273][12 01][00] device not detected.
[00100823][12 02][00] device not detected.
[00113369][12 03][00] device not detected.
[00125911][15 00][00] device not detected.
[00138456][17 00][00] device not detected.
[00151002][17 01][00] device not detected.
[00163553][19 00][00] device not detected.
[00163596][01 00][00] v1.32.5432 -> v1.32.5432
[00163642][01 01][00] v1.32.5432 -> v1.32.5432
[00176186][08 00][00] device not detected.
[00176283][09 00][00] v0.0.0.0 -> v4.1.0.0 need upgrade.
[00176328]Done.

[00178371]Waiting for user confirm...
[00188419]Timeout, start upgrade automatically.

[00188512]Firmware upgrading[1]...
[00188586][09 00] Firmware upgrade start...
[00240720][09 00] Firmware upgrade finished successfully.
[00240766]Done.

[00240814]Version checking[2]...
[00240910][03 06][00] v2.4.20.50 -> v2.4.20.50
[00240992][03 05][00] v34.2.0.9 -> v34.2.0.9
[00241049][04 00][00] v1.48.0.0 -> v1.48.0.0
[00241285][11 00][00] v1.8.0.0 -> v1.8.0.0
[00241412][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00241465][11 01][00] v1.8.0.0 -> v2.0.0.33
[00241561][12 00][00] v1.12.0.0 -> v1.12.0.0
[00241660][12 01][00] v1.12.0.0 -> v1.12.0.0
[00241760][12 02][00] v1.12.0.0 -> v1.12.0.0
[00241860][12 03][00] v1.12.0.0 -> v1.12.0.0
[00254405][15 00][00] device not detected.
[00254595][17 00][00] v1.1.1.7 -> v1.1.1.7
[00254736][17 01][00] v1.0.2.7 -> v1.0.2.7
[00254811][19 00][00] v1.0.8.96 -> v1.0.8.96
[00254858][01 00][00] v1.32.5432 -> v1.32.5432
[00254902][01 01][00] v1.32.5432 -> v1.32.5432
[00267452][08 00][00] device not detected.
[00267527][09 00][05] v4.1.0.0 -> v4.1.0.0
[00267570]Packet upgrade failed at version checking.



[00012808]========== remo-con disconnect. boot(15) ============
[00012851]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x0a1b3b66].
[00012899]Packet upgrade start...

[00012945]Packet checking...
[00012993]Packet vlink 01.11.0020 <-> 01.11.0020.
[00013036]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00013079]Done.

[00013126]Version checking[1]...
[00025671][03 06][00] device not detected.
[00038214][03 05][00] device not detected.
[00038275][04 00][00] v1.48.0.0 -> v1.48.0.0
[00050829][11 00][00] device not detected.
[00063375][11 01][00] device not detected.
[00075923][12 00][00] device not detected.
[00088472][12 01][00] device not detected.
[00101013][12 02][00] device not detected.
[00113556][12 03][00] device not detected.
[00126102][15 00][00] device not detected.
[00138650][17 00][00] device not detected.
[00151201][17 01][00] device not detected.
[00163744][19 00][00] device not detected.
[00163786][01 00][00] v1.32.5432 -> v1.32.5432
[00163827][01 01][00] v1.32.5432 -> v1.32.5432
[00176369][08 00][00] device not detected.
[00176432][09 00][00] v0.0.0.0 -> v4.1.0.0 need upgrade.
[00176471]Done.

[00178514]Waiting for user confirm...
[00188572]Timeout, start upgrade automatically.

[00188657]Firmware upgrading[1]...
[00188731][09 00] Firmware upgrade start...
[00240893][09 00] Firmware upgrade finished successfully.
[00240939]Done.

[00240989]Version checking[2]...
[00241077][03 06][00] v2.4.20.50 -> v2.4.20.50
[00241177][03 05][00] v34.2.0.9 -> v34.2.0.9
[00241233][04 00][00] v1.48.0.0 -> v1.48.0.0
[00241443][11 00][00] v1.8.0.0 -> v1.8.0.0
[00241557][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00241600][11 01][00] v1.8.0.0 -> v2.0.0.33
[00241687][12 00][00] v1.12.0.0 -> v1.12.0.0
[00241792][12 01][00] v1.12.0.0 -> v1.12.0.0
[00241867][12 02][00] v1.12.0.0 -> v1.12.0.0
[00241947][12 03][00] v1.12.0.0 -> v1.12.0.0
[00254499][15 00][00] device not detected.
[00254607][17 00][00] v1.1.1.7 -> v1.1.1.7
[00254728][17 01][00] v1.0.2.7 -> v1.0.2.7
[00254787][19 00][00] v1.0.8.96 -> v1.0.8.96
[00254839][01 00][00] v1.32.5432 -> v1.32.5432
[00254883][01 01][00] v1.32.5432 -> v1.32.5432
[00267429][08 00][00] device not detected.
[00267490][09 00][05] v4.1.0.0 -> v4.1.0.0
[00267533]Packet upgrade failed at version checking.



[00012811]========== remo-con disconnect. boot(15) ============
[00012855]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x0a1b3b66].
[00012920]Packet upgrade start...

[00012971]Packet checking...
[00013017]Packet vlink 01.11.0020 <-> 01.11.0020.
[00013068]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00013108]Done.

[00013153]Version checking[1]...
[00013244][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013329][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013378][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013527][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013664][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013707][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013820][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013919][12 01][00] v1.12.0.0 -> v1.12.0.0
[00014040][12 02][00] v1.12.0.0 -> v1.12.0.0
[00014146][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026689][15 00][00] device not detected.
[00026809][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026965][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027019][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027063][01 00][00] v1.32.5432 -> v1.32.5432
[00027114][01 01][00] v1.32.5432 -> v1.32.5432
[00039657][08 00][00] device not detected.
[00039720][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039771]Packet upgrade failed at version checking.



Regards,

Oh dear, why did you update in the first place, did you have a problem?
It doesn't help you but updating is the LAST RESORT as it frequently leads to disaster!!
Sorry mate!