Hello DJI FVP fans,
what are the sizes of the 8 screws that fix the transparent black plastic cover please?
it seems to me that the 4 frontals are slightly longer?
Thank you very much and have a nice day

The 4 at the front are M1.5 x 7mm, cone shaped, the 4 at the side are M2 x 5.5mm Cheese Head, all driven by 1.5mm Hex tool.

Thank you very much Buzzyone
have a nice day,

Buzzyone Posted at 4-8 10:44
The 4 at the front are M1.5 x 7mm, cone shaped, the 4 at the side are M2 x 5.5mm Cheese Head, all driven by 1.5mm Hex tool.

Can screws for this drone be purchased from DJI?

It would be helpful to have a screw pack available.

Specifically, I'm looking for the screws that attach the landing gear. I had one of the front landing gear pull away from its seating when trying to remove the arm bracers. (I could mention that removing the bracers puts a lot of stress on the front landing gear, at the back.) I was able to reseat the landing gear joint by removing the two screws and resetting them. However, in the process I dropped and lost one of the screws. I have replaced it with a screw from another DJI FPV Drone that was previously new in box. However, I am still short one screw.

Thanks for any help.