neoborg
lvl.3
United Kingdom
Offline
|
I've had issues finding the right cable for my Mini 2's controller.
1. Sometimes the end of the cable, where the cable strain relief block is, can be too thick to go in to the top of the remote.
2. I purchased a 30cm cable from eBay and it seems that one end of the cable is paired to one port on the remote. For example, I bought a cable with the normal straight connector on one end and a right angled connector on the other end - the cable only works if i plug the right angled connector in to the bottom of the remote.
I'd welcome any suggestions for a decent 30cm cable with a right angled connector on one end. if I have to pay a little over the odds for a good one from eBay, then that's what I'll do. |
|