Please select Into the mobile phone version | Continue to access the computer ver.
Weavy footage... why?
Uploading and Loding Picture ...(0/1)
o(^-^)o
novoweb
lvl.2
Flight distance : 444774 ft
Canada
Offline

Sometime at the beginning of the video the picture is weavy... do somenone knows why and is there a solution to that.This is started 3-4 days after i received my PHANTOM 3 PRO.
See the video:
Filmed in 3840x2160p 30fps but resized in 1080p




2015-7-23
Use props
colin.buckle
lvl.2
Australia
Offline

I have the same issue and some people say that it is all about shutter speed (i.e need to have ND filters to stop it) and others have said that it is an issue with prop balance.

I guess it would be at least one of those but I am no expert on the subject.

Col.
2015-7-23
Use props
Slyone
lvl.2
Flight distance : 1715308 ft
Hong Kong
Offline

Whats your shutter speed? looks like it could be a possible shutter speed issue
2015-7-23
Use props
Willie Wonka
lvl.4
United States
Offline

that is no shutter speed !!! this is VERY BAD vibration that you need to find the source of.  Did you install the extra two gimbal savers ? if so remove them, as there should only be two.
2015-7-23
Use props
novoweb
lvl.2
Flight distance : 444774 ft
Canada
Offline

Willie Wonka Posted at 2015-7-24 12:43
that is no shutter speed !!! this is VERY BAD vibration that you need to find the source of.  Did yo ...

I did install the 2 extras gimbal savers.... i though i lost 2 because of a miner crash. I'l remove those and let you know if it solve this issue... Thanks!
2015-7-23
Use props
020667
lvl.3
Flight distance : 14495 ft
Denmark
Offline

Drone vibration nothing to do with shutter speed
2015-7-23
Use props
alexassenmacher
Second Officer
Flight distance : 216430 ft
  • >>>
Spain
Offline

As said above, nothing to do with shutter speed but with the automatic stabilisation of the recording footage. Somehow your drone is pushing harder at some point (wind, missing gimbal savers,...). Had the same problem, found out one or two of those savers were missing.
2015-7-23
Use props
jimcloud74
lvl.4
Flight distance : 1298317 ft
United States
Offline

alexassenmacher Posted at 2015-7-24 15:29
As said above, nothing to do with shutter speed but with the automatic stabilisation of the recordin ...

There should only be 2 savers installed from factory. This can cause the jello effect.
2015-7-24
Use props
novoweb
lvl.2
Flight distance : 444774 ft
Canada
Offline

Willie Wonka Posted at 2015-7-24 12:43
that is no shutter speed !!! this is VERY BAD vibration that you need to find the source of.  Did yo ...

Ok... i removed the 2 extras gimbal savers and the jello effect is gone! Thanks again!
2015-7-24
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules